Schneider Electric BMH1003T16A1A Motor 100Mm Iec 8,4Nm Ip54 2150W Key
SKU:
BMH1003T16A1A
UPC:
3.60649E+12
MPN:
Condition:
New
Device Short Name:
BMH
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Axial Force Fa:
0.2 x Fr
Centring Collar Diameter:
95 mm
Sustainable Offer Status:
Green Premium product
Nominal Torque:
5.6 N.m LXM32.D30M2 10 A, 230 V, single phase
Speed Feedback Resolution:
32768 points/turn
Phase:
three phase
Number Of Mounting Holes:
4
Continuous Stall Current:
0.416666666666667
Electrical Connection:
straight connectors
Nominal Speed:
2500 rpm LXM32.D30M2 10 A, 230 V, single phase
Product Or Component Type:
servo motor
Number Of Motor Stacks:
3
Maximum Mechanical Speed:
6000 rpm
Back Emf Constant:
54.8 V/krpm 120 °C
Continuous Power:
2.62 W
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Range Compatibility:
Lexium 32
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
N/A
[Us] Rated Supply Voltage:
240 V
Product Compatibility:
LXM32.D30M2 230 V single phase
Length:
192.6 mm
Torque Constant:
0.851 N.m/A 120 °C
Ip Degree Of Protection:
IP54 standard
Mercury Free:
Yes
Continuous Stall Torque:
8.2 N.m LXM32.D30M2 10 A, 230 V, single phase
Peak Stall Torque:
22.8 N.m LXM32.D30M2 10 A, 230 V, single phase
Motor Flange Size:
100 mm
Circle Diameter Of The Mounting Holes:
115 mm
Number Of Motor Poles:
10
Maximum Current Irms:
30 A LXM32.D30M2
Shaft End:
keyed
Feedback Type:
single turn SinCos Hiperface
Stator Inductance:
3 mH 20 °C
Key Width:
30 mm
Environmental Disclosure:
ENVPEP111002EN
Type Of Cooling:
natural convection
Holding Brake:
without
Pvc Free:
Yes
Second Shaft:
without second shaft end
Warranty:
18 months
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Diameter:
19 mm
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
