Schneider Electric BMH1401P06A2A Motor 140Mm Iec 10,3Nm Ip54 2640W No
SKU:
BMH1401P06A2A
UPC:
3.60648E+12
MPN:
Condition:
New
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Mounting Support:
international standard flange
Stator Resistance:
0.69 Ohm 20 °C
Length:
152 mm
Stator Electrical Time Constant:
9.7 ms 20 °C
Number Of Motor Poles:
10
Number Of Mounting Holes:
4
Continuous Power:
2.85 W
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
Warranty:
18 months
Holding Brake:
without
Range Compatibility:
Lexium 32
Centring Collar Depth:
3.5 mm
Maximum Mechanical Speed:
4000 rpm
Circle Diameter Of The Mounting Holes:
165 mm
Pvc Free:
Yes
Shaft Diameter:
24 mm
Speed Feedback Resolution:
32768 points/turn
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Motor Stacks:
1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Axial Force Fa:
0.2 x Fr
Rohs Exemption Information:
Yes
Device Short Name:
BMH
Torque Constant:
1.2 N.m/A 120 °C
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Ip Degree Of Protection:
IP54 standard
Stator Inductance:
6.7 mH 20 °C
Net Weight:
8 kg
China Rohs Regulation:
X
Second Shaft:
without second shaft end
Motor Flange Size:
140 mm
Maximum Permanent Current:
29.8 A
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
Mercury Free:
Yes
Shaft End:
smooth shaft
Product Or Component Type:
servo motor
Environmental Disclosure:
ENVPEP111002EN
Continuous Stall Current:
8.58 A
Type Of Cooling:
natural convection
Rotor Inertia:
16.46 kg.cm²
Back Emf Constant:
77.4 V/krpm 120 °C
Circularity Profile:
N/A
Shaft Length:
50 mm
Centring Collar Diameter:
130 mm
Phase:
three phase
Mounting Holes Diameter:
11 mm
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
Feedback Type:
single turn SinCos Hiperface
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 4000RPM and keyed shaft end without holding...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 4000RPM and smooth shaft end without holding...
