Schneider Electric BMH1401P12F2A Motor 140Mm Iec 10,3Nm Ip54 2640W Key
SKU:
BMH1401P12F2A
UPC:
3606485198378
MPN:
Condition:
New
Back Emf Constant:
77.4 V/krpm 120 °C
Rohs Exemption Information:
Yes
Number Of Mounting Holes:
4
Mounting Holes Diameter:
11 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Diameter:
130 mm
Stator Resistance:
0.69 Ohm 20 °C
Shaft Length:
50 mm
Net Weight:
10.3 kg
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
Maximum Mechanical Speed:
4000 rpm
Circle Diameter Of The Mounting Holes:
165 mm
Holding Torque:
18 N.m holding brake
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Current:
8.58 A
Maximum Axial Force Fa:
0.2 x Fr
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
Speed Feedback Resolution:
131072 points/turn x 4096 turns
[Us] Rated Supply Voltage:
480 V
Shaft End:
keyed
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
Torque Constant:
1.2 N.m/A 120 °C
Brake Pull-In Power:
18 W
Rotor Inertia:
17.96 kg.cm²
Phase:
three phase
Product Or Component Type:
servo motor
Feedback Type:
multiturn SinCos Hiperface
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Circularity Profile:
N/A
Mounting Support:
international standard flange
China Rohs Regulation:
X
Ip Degree Of Protection:
IP54 standard
Key Width:
40 mm
Warranty:
18 months
Length:
187 mm
Holding Brake:
with
Shaft Diameter:
24 mm
Environmental Disclosure:
ENVPEP111002EN
Second Shaft:
without second shaft end
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
Number Of Motor Stacks:
1
Electrical Connection:
rotatable right-angled connectors
Stator Electrical Time Constant:
9.7 ms 20 °C
Number Of Motor Poles:
10
Device Short Name:
BMH
Continuous Power:
2.85 W
Range Compatibility:
Lexium 32
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
Motor Flange Size:
140 mm
Centring Collar Depth:
3.5 mm
Stator Inductance:
6.7 mH 20 °C
Maximum Permanent Current:
29.8 A
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 4000RPM and keyed shaft end without holding...
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
