Schneider Electric BMH1401P21F1A Motor 140Mm Iec 10,3Nm Ip65/67 2640W No
SKU:
BMH1401P21F1A
UPC:
3606485201184
MPN:
Condition:
New
Electrical Connection:
straight connectors
Stator Resistance:
0.69 Ohm 20 °C
Continuous Stall Current:
8.58 A
Motor Flange Size:
140 mm
Centring Collar Diameter:
130 mm
Feedback Type:
single turn SinCos Hiperface
Torque Constant:
1.2 N.m/A 120 °C
Holding Brake:
with
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
Maximum Mechanical Speed:
4000 rpm
Shaft Length:
50 mm
Mercury Free:
Yes
Second Shaft:
without second shaft end
Maximum Permanent Current:
29.8 A
Circularity Profile:
N/A
Number Of Mounting Holes:
4
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
Length:
187 mm
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Stator Electrical Time Constant:
9.7 ms 20 °C
China Rohs Regulation:
X
Circle Diameter Of The Mounting Holes:
165 mm
Speed Feedback Resolution:
131072 points/turn
Mounting Support:
international standard flange
Rohs Exemption Information:
Yes
Continuous Power:
2.85 W
Centring Collar Depth:
3.5 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
Maximum Axial Force Fa:
0.2 x Fr
Range Compatibility:
Lexium 32
Number Of Motor Poles:
10
Phase:
three phase
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Holes Diameter:
11 mm
Rotor Inertia:
17.96 kg.cm²
Product Or Component Type:
servo motor
Number Of Motor Stacks:
1
Shaft Diameter:
24 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Device Short Name:
BMH
Holding Torque:
18 N.m holding brake
Sustainable Offer Status:
Green Premium product
Shaft End:
smooth shaft
Environmental Disclosure:
ENVPEP111002EN
Pvc Free:
Yes
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Stator Inductance:
6.7 mH 20 °C
[Us] Rated Supply Voltage:
480 V
Warranty:
18 months
Brake Pull-In Power:
18 W
Back Emf Constant:
77.4 V/krpm 120 °C
Net Weight:
10.3 kg
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
