Schneider Electric BMH1401P36F2A Motor 140Mm Iec 10,3Nm Ip65/67 2640W
SKU:
BMH1401P36F2A
UPC:
3606485198545
MPN:
Condition:
New
Torque Constant:
1.2 N.m/A 120 °C
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Type Of Cooling:
natural convection
Brake Pull-In Power:
18 W
Shaft End:
keyed
Speed Feedback Resolution:
32768 points/turn
Second Shaft:
without second shaft end
China Rohs Regulation:
X
Back Emf Constant:
77.4 V/krpm 120 °C
Sustainable Offer Status:
Green Premium product
[Us] Rated Supply Voltage:
480 V
Number Of Mounting Holes:
4
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Key Width:
40 mm
Length:
187 mm
Stator Inductance:
6.7 mH 20 °C
Circle Diameter Of The Mounting Holes:
165 mm
Maximum Axial Force Fa:
0.2 x Fr
Number Of Motor Stacks:
1
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Holding Torque:
18 N.m holding brake
Continuous Power:
2.85 W
Environmental Disclosure:
ENVPEP111002EN
Shaft Diameter:
24 mm
Holding Brake:
with
Rohs Exemption Information:
Yes
Number Of Motor Poles:
10
Feedback Type:
single turn SinCos Hiperface
Stator Electrical Time Constant:
9.7 ms 20 °C
Continuous Stall Current:
8.58 A
Circularity Profile:
N/A
Electrical Connection:
rotatable right-angled connectors
Centring Collar Diameter:
130 mm
Warranty:
18 months
Maximum Permanent Current:
29.8 A
Pvc Free:
Yes
Mercury Free:
Yes
Mounting Holes Diameter:
11 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Device Short Name:
BMH
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
Motor Flange Size:
140 mm
Shaft Length:
50 mm
Stator Resistance:
0.69 Ohm 20 °C
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
Mounting Support:
international standard flange
Maximum Mechanical Speed:
4000 rpm
Rotor Inertia:
17.96 kg.cm²
Product Or Component Type:
servo motor
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
