Schneider Electric BMH1401P37F2A Motor 140Mm Iec 10,3Nm Ip65/67 2640W
SKU:
BMH1401P37F2A
UPC:
3606485198705
MPN:
Condition:
New
Continuous Stall Torque:
10.3 N.m LXM32.D30M2 10 A, 230 V, single phase || 10.3 N.m LXM32.D30N4 10 A, 400 V, three phase || 10.3 N.m LXM32.D30N4 10 A, 480 V, three phase
Maximum Axial Force Fa:
0.2 x Fr
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Range Compatibility:
Lexium 32
Type Of Cooling:
natural convection
Stator Electrical Time Constant:
9.7 ms 20 °C
Nominal Output Power:
1450 W LXM32.D30M2 10 A, 230 V, single phase || 2400 W LXM32.D30N4 10 A, 400 V, three phase || 2400 W LXM32.D30N4 10 A, 480 V, three phase
Mounting Support:
international standard flange
Phase:
three phase
Key Width:
40 mm
Maximum Mechanical Speed:
4000 rpm
Number Of Mounting Holes:
4
Continuous Stall Current:
8.58 A
[Us] Rated Supply Voltage:
480 V
Net Weight:
10.3 kg
Rotor Inertia:
17.96 kg.cm²
Maximum Permanent Current:
29.8 A
Rohs Exemption Information:
Yes
Second Shaft:
without second shaft end
Feedback Type:
multiturn SinCos Hiperface
Shaft End:
keyed
Warranty:
18 months
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Length:
187 mm
Circularity Profile:
N/A
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Environmental Disclosure:
ENVPEP111002EN
Circle Diameter Of The Mounting Holes:
165 mm
Centring Collar Diameter:
130 mm
Torque Constant:
1.2 N.m/A 120 °C
Nominal Torque:
6.9 N.m LXM32.D30M2 10 A, 230 V, single phase || 7.7 N.m LXM32.D30N4 10 A, 400 V, three phase || 7.7 N.m LXM32.D30N4 10 A, 480 V, three phase
Shaft Length:
50 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Motor Flange Size:
140 mm
Product Or Component Type:
servo motor
Shaft Diameter:
24 mm
Mounting Holes Diameter:
11 mm
Number Of Motor Poles:
10
Holding Torque:
18 N.m holding brake
Maximum Current Irms:
29.8 A LXM32.D30M2 || 29.8 A LXM32.D30N4
Stator Resistance:
0.69 Ohm 20 °C
Peak Stall Torque:
30.8 N.m LXM32.D30M2 10 A, 230 V, single phase || 30.8 N.m LXM32.D30N4 10 A, 400 V, three phase || 30.8 N.m LXM32.D30N4 10 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
Centring Collar Depth:
3.5 mm
Continuous Power:
2.85 W
Product Compatibility:
LXM32.D30M2 230 V single phase || LXM32.D30N4 400...480 V three phase
Maximum Radial Force Fr:
1930 N 1000 rpm || 1530 N 2000 rpm || 1340 N 3000 rpm
Brake Pull-In Power:
18 W
Back Emf Constant:
77.4 V/krpm 120 °C
Holding Brake:
with
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Speed:
2000 rpm LXM32.D30M2 10 A, 230 V, single phase || 3000 rpm LXM32.D30N4 10 A, 400 V, three phase || 3000 rpm LXM32.D30N4 10 A, 480 V, three phase
China Rohs Regulation:
X
Device Short Name:
BMH
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
