Schneider Electric BMH1402P12F2A Motor 140Mm Iec 18,5Nm Ip54 3900W Key
SKU:
BMH1402P12F2A
UPC:
3606485207643
MPN:
Condition:
New
Stator Electrical Time Constant:
13 ms 20 °C
Maximum Permanent Current:
57.4 A
Nominal Torque:
12.2 N.m LXM32.D72N4 24 A, 400 V, three phase || 12.2 N.m LXM32.D72N4 24 A, 480 V, three phase
Centring Collar Diameter:
130 mm
Holding Brake:
with
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rotor Inertia:
33.5 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Current Irms:
57.4 A LXM32.D72N4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Feedback Type:
multiturn SinCos Hiperface
Maximum Mechanical Speed:
4000 rpm
Nominal Speed:
3000 rpm LXM32.D72N4 24 A, 400 V, three phase || 3000 rpm LXM32.D72N4 24 A, 480 V, three phase
Shaft End:
keyed
Torque Constant:
1.1 N.m/A 120 °C
Number Of Mounting Holes:
4
Centring Collar Depth:
3.5 mm
Continuous Power:
4.44 W
Number Of Motor Poles:
10
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Key Width:
40 mm
Warranty:
18 months
Continuous Stall Current:
16.83 A
Stator Resistance:
0.23 Ohm 20 °C
Shaft Diameter:
24 mm
Maximum Axial Force Fa:
0.2 x Fr
China Rohs Regulation:
X
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Circle Diameter Of The Mounting Holes:
165 mm
Mounting Support:
international standard flange
Holding Torque:
18 N.m holding brake
Continuous Stall Torque:
18.5 N.m LXM32.D72N4 24 A, 400 V, three phase || 18.5 N.m LXM32.D72N4 24 A, 480 V, three phase
Phase:
three phase
Rohs Exemption Information:
Yes
Back Emf Constant:
70.7 V/krpm 120 °C
Peak Stall Torque:
50.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 50.3 N.m LXM32.D72N4 24 A, 480 V, three phase
Device Short Name:
BMH
Mounting Holes Diameter:
11 mm
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Pvc Free:
Yes
Motor Flange Size:
140 mm
Net Weight:
14.3 kg
Product Or Component Type:
servo motor
Stator Inductance:
3 mH 20 °C
Circularity Profile:
N/A
Range Compatibility:
Lexium 32
Shaft Length:
50 mm
Type Of Cooling:
natural convection
Mercury Free:
Yes
Brake Pull-In Power:
18 W
[Us] Rated Supply Voltage:
480 V
Sustainable Offer Status:
Green Premium product
Length:
227 mm
Maximum Radial Force Fr:
2240 N 1000 rpm || 1780 N 2000 rpm || 1550 N 3000 rpm
Nominal Output Power:
3500 W LXM32.D72N4 24 A, 400 V, three phase || 3500 W LXM32.D72N4 24 A, 480 V, three phase
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed...
This product is part of the Lexium 32 range, an offer of servo motors from 0.15kW to 11kW. The 10-pole servo motor features maximum mechanical speed of 4000RPM and keyed shaft end without holding...
