null
Schneider Electric BMH1402P17F2A Motor 140Mm Iec 18,5Nm Ip54 3900W Key

Schneider Electric BMH1402P17F2A Motor 140Mm Iec 18,5Nm Ip54 3900W Key

Schneider Electric
SKU:
BMH1402P17F2A
|
UPC:
3606485207957
$2,589.45
(No reviews yet) Write a Review
Condition:
New
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
Current Stock:
Description
This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 4000RPM, parallel keyed shaft and holding brake. It is equipped with a SinCos Hiperface® encoder (32768 points/turn x 4096 turns) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 16.83A and a continuous power of 4.44W. The shaft dimensions are 24mm (Diameter) x 50mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP54 rated product. Its dimensions are 227mm (Length) x 140mm (Width), centring collar dimensions are 3.5mm (Depth) x 130mm (Diameter) with 165mm circle diameter of the mounting hole. It weighs 14.3kg. This product is compatible with Lexium 32 servo drives. It supports international standard 140mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.
Additional Information
Stator Electrical Time Constant:
13 ms 20 °C
Torque Constant:
1.1 N.m/A 120 °C
Circularity Profile:
N/A
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Continuous Stall Torque:
18.5 N.m LXM32.D72N4 24 A, 400 V, three phase || 18.5 N.m LXM32.D72N4 24 A, 480 V, three phase
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Shaft Length:
50 mm
Type Of Cooling:
natural convection
Length:
227 mm
Continuous Stall Current:
16.83 A
Ip Degree Of Protection:
IP54 standard
Stator Resistance:
0.23 Ohm 20 °C
Nominal Torque:
12.2 N.m LXM32.D72N4 24 A, 400 V, three phase || 12.2 N.m LXM32.D72N4 24 A, 480 V, three phase
Centring Collar Diameter:
130 mm
Back Emf Constant:
70.7 V/krpm 120 °C
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Feedback Type:
multiturn SinCos Hiperface
Pvc Free:
Yes
Brake Pull-In Power:
18 W
Mounting Support:
international standard flange
Maximum Current Irms:
57.4 A LXM32.D72N4
Holding Brake:
with
Nominal Output Power:
3500 W LXM32.D72N4 24 A, 400 V, three phase || 3500 W LXM32.D72N4 24 A, 480 V, three phase
Mounting Holes Diameter:
11 mm
Environmental Disclosure:
ENVPEP111002EN
Peak Stall Torque:
50.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 50.3 N.m LXM32.D72N4 24 A, 480 V, three phase
China Rohs Regulation:
X
Key Width:
40 mm
Second Shaft:
without second shaft end
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Warranty:
18 months
Holding Torque:
18 N.m holding brake
Number Of Motor Stacks:
2
Maximum Permanent Current:
57.4 A
Continuous Power:
4.44 W
Rohs Exemption Information:
Yes
Stator Inductance:
3 mH 20 °C
Circle Diameter Of The Mounting Holes:
165 mm
Shaft Diameter:
24 mm
Motor Flange Size:
140 mm
Maximum Mechanical Speed:
4000 rpm
Number Of Mounting Holes:
4
Shaft End:
keyed
Product Or Component Type:
servo motor
Centring Collar Depth:
3.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Device Short Name:
BMH
Net Weight:
14.3 kg
Nominal Speed:
3000 rpm LXM32.D72N4 24 A, 400 V, three phase || 3000 rpm LXM32.D72N4 24 A, 480 V, three phase
Electrical Connection:
rotatable right-angled connectors
Range Compatibility:
Lexium 32
Number Of Motor Poles:
10
Maximum Axial Force Fa:
0.2 x Fr
Maximum Radial Force Fr:
2240 N 1000 rpm || 1780 N 2000 rpm || 1550 N 3000 rpm
Phase:
three phase
[Us] Rated Supply Voltage:
480 V
Rotor Inertia:
33.5 kg.cm²
Datasheet:
View