Schneider Electric BMH1902P31A2A Motor 190Mm Iec 48Nm Ip65/67 6.1Kw Key

(No reviews yet) Write a Review
SKU:
BMH1902P31A2A
UPC:
3606485264158
Condition:
New
Shaft Diameter:
38 mm
Circle Diameter Of The Mounting Holes:
215 mm
Holding Brake:
without
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Stator Resistance:
0.15 Ohm 20 °C
Maximum Permanent Current:
114 A
Environmental Disclosure:
ENVPEP111049EN
[Us] Rated Supply Voltage:
480 V
Electrical Connection:
rotatable right-angled connectors
Nominal Torque:
22.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 22.3 N.m LXM32.D72N4 24 A, 480 V, three phase || 29 N.m LXM32MD85N4 32 A, 400 V, three phase || 29 N.m LXM32MD85N4 32 A, 480 V, three phase || 29 N.m LXM32MC10N4 40 A, 400 V, three phase || 29 N.m LXM3
Continuous Stall Torque:
37.4 N.m LXM32.D72N4 24 A, 400 V, three phase || 37.4 N.m LXM32.D72N4 24 A, 480 V, three phase || 48 N.m LXM32MD85N4 32 A, 400 V, three phase || 48 N.m LXM32MD85N4 32 A, 480 V, three phase || 48 N.m LXM32MC10N4 40 A, 400 V, three phase || 48 N.m LXM3
Pvc Free:
Yes
Product Compatibility:
LXM32.D72N4 400...480 V three phase
Number Of Motor Poles:
10
China Rohs Regulation:
X
Sustainable Offer Status:
Green Premium product
Feedback Type:
single turn SinCos Hiperface
Shaft End:
keyed
Mercury Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Warranty:
18 months
Second Shaft:
without second shaft end
Torque Constant:
1.56 N.m/A 120 °C
Circularity Profile:
N/A
Mounting Support:
international standard flange
Nominal Speed:
2000 rpm LXM32MC10N4 40 A, 400 V, three phase || 2000 rpm LXM32MC10N4 40 A, 480 V, three phase || 2500 rpm LXM32.D72N4 24 A, 400 V, three phase || 2500 rpm LXM32.D72N4 24 A, 480 V, three phase || 2000 rpm LXM32MD85N4 32 A, 400 V, three phase || 2000
Stator Electrical Time Constant:
25.7 ms 20 °C
Maximum Current Irms:
72 A LXM32.D72N4
Net Weight:
31 kg
Type Of Cooling:
natural convection
Maximum Axial Force Fa:
0.2 x Fr
Device Short Name:
BMH
Speed Feedback Resolution:
131072 points/turn
Maximum Radial Force Fr:
4200 N 1000 rpm
Product Or Component Type:
servo motor
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Rohs Exemption Information:
Yes
Phase:
three phase
Centring Collar Diameter:
180 mm
Range Compatibility:
Lexium 32
Motor Flange Size:
190 mm
Continuous Power:
6.1 W
Centring Collar Depth:
4 mm
Continuous Stall Current:
30.8 A
Peak Stall Torque:
101 N.m LXM32.D72N4 24 A, 400 V, three phase || 101 N.m LXM32.D72N4 24 A, 480 V, three phase || 115.5 N.m LXM32MD85N4 32 A, 400 V, three phase || 115.5 N.m LXM32MD85N4 32 A, 480 V, three phase || 130.7 N.m LXM32MC10N4 40 A, 400 V, three phase || 130.
Rotor Inertia:
130.1 kg.cm²
Length:
250 mm
Maximum Mechanical Speed:
4000 rpm
Stator Inductance:
3.86 mH 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Key Width:
70 mm
Back Emf Constant:
108.3 V/krpm 120 °C
Shaft Length:
80 mm
Nominal Output Power:
5900 W LXM32.D72N4 24 A, 400 V, three phase || 5900 W LXM32.D72N4 24 A, 480 V, three phase || 6070 W LXM32MD85N4 32 A, 400 V, three phase || 6070 W LXM32MD85N4 32 A, 480 V, three phase || 6070 W LXM32MC10N4 40 A, 400 V, three phase || 6070 W LXM32MC1
Mounting Holes Diameter:
14 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Mounting Holes:
4
Number Of Motor Stacks:
2
Datasheet:
View
$4,149.49

Description

This product is part of the Lexium 32 range, an offer of motion servo drives for machines from 0.15kW to 7kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of 4000RPM and parallel keyed shaft without holding brake. It is equipped with a SinCos Hiperface® encoder (131072 points/turn) for automatic transmission of data from the servo motor to the servo drive. BMH servo motor is medium inertia motor, it is particularly suitable for high-load applications and allows the movement to be adjusted in a more robust manner. It is a synchronous servo motor with a rated supply voltage of 480V, a continuous stall current of 30.8A and a continuous power of 6.1W. The shaft dimensions are 38mm (Diameter) x 80mm (Length). It is furnished with rotatable right-angled connectors for electrical connection. It is an IP65 (standard) and IP67 (with kit) rated product. Its dimensions are 250mm (Length) x 190mm (Width), centring collar dimensions are 4mm (Depth) x 180mm (Diameter) with 215mm circle diameter of the mounting hole. It weighs 31kg. This product is compatible with Lexium 32 servo drives. It supports international standard 190mm flange mount with a natural convection cooling system. Encoder gives the absolute position of the motor so that flows can be synchronized and sends data from the servo motor to the servo drive, which provides automatic identification of the motor when the servo drive starts. BMH servo motor with a 3-phase stator and neodymium iron boron (NdFeB) magnets. Casing with RAL 9005 opaque black paint protective coating. 4-point axial mounting flange. Cables and connectors to be ordered separately.
View AllClose