Schneider Electric BMI0702P07A Mot 3P 70Mm Ip54 790W Nky Enc Mlt 16
SKU:
BMI0702P07A
UPC:
3606485375700
MPN:
Condition:
New
Stator Inductance:
25.75 mH 20 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rotor Inertia:
1.13 kg.cm²
Number Of Motor Stacks:
2
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Supply Voltage Limits:
208-480 V
Back Emf Constant:
77.18 V/krpm 20 °C
Electrical Connection:
printed circuit board connector
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Mercury Free:
Yes
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Phase:
three phase
Warranty:
18 months
Centring Collar Diameter:
60 mm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Environmental Disclosure:
ENVPEP1312017EN
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Maximum Mechanical Speed:
8000 rpm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Second Shaft:
without second shaft end
Type Of Cooling:
natural convection
Distance Shaft Shoulder-Flange:
2.5 mm
Pvc Free:
Yes
Continuous Output Current:
2 A 8 kHz
Network Frequency Limits:
47.5-63 Hz
Supply Frequency:
50/60 Hz - 5...5 %
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Feedback Type:
absolute multiturn SinCos Hiperface
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Mounting Holes Diameter:
5.5 mm
Holding Brake:
without
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Shaft Length:
23 mm
Motor Flange Size:
70 mm
Product Or Component Type:
servo motor with power stage
Shaft End:
untapped
Number Of Motor Poles:
10
Circle Diameter Of The Mounting Holes:
75-82 mm
Device Short Name:
BMI
Sustainable Offer Status:
Green Premium product
Ip Degree Of Protection:
shaft IP54 || housing IP65
Shaft Diameter:
11 mm
Emc Filter:
integrated
Length:
268 mm
Stator Electrical Time Constant:
2.9 ms 20 °C
Number Of Mounting Holes:
4
Torque Constant:
1.15 N.m/A 20 °C
Maximum Axial Force Fa:
0.2 x Fr
Stator Resistance:
8.89 Ohm 20 °C
Range Compatibility:
Lexium 32i
Rohs Exemption Information:
Yes
Mounting Support:
international standard flange
Centring Collar Depth:
2.5 mm
China Rohs Regulation:
X
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
