Schneider Electric BMI0702P17F Mot 3P 70Mm Ip54 790W Key Enc Mlt 16 Br
SKU:
BMI0702P17F
UPC:
3606485375793
MPN:
Condition:
New
Range Compatibility:
Lexium 32i
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Or Component Type:
servo motor with power stage
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Number Of Motor Poles:
10
Mounting Holes Diameter:
5.5 mm
Network Frequency Limits:
47.5-63 Hz
Centring Collar Depth:
2.5 mm
Environmental Disclosure:
ENVPEP1312017EN
Continuous Stall Current:
0.0833333333333333
Motor Flange Size:
70 mm
Centring Collar Diameter:
60 mm
Ip Degree Of Protection:
shaft IP54 || housing IP65
Circularity Profile:
ENVEOLI1312017EN
China Rohs Regulation:
X
Shaft End:
keyed
Pvc Free:
Yes
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Rotor Inertia:
1.24 kg.cm²
Stator Electrical Time Constant:
2.9 ms 20 °C
Supply Frequency:
50/60 Hz - 5...5 %
Key Width:
4 mm
Continuous Output Current:
2 A 8 kHz
Supply Voltage Limits:
208-480 V
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Brake Pull-In Power:
5 W
Second Shaft:
without second shaft end
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Type Of Cooling:
natural convection
Holding Torque:
3 N.m holding brake
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Axial Force Fa:
0.2 x Fr
Circle Diameter Of The Mounting Holes:
75-82 mm
Length:
306 mm
Feedback Type:
absolute multiturn SinCos Hiperface
Electrical Connection:
printed circuit board connector
Rohs Exemption Information:
Yes
Warranty:
18 months
Phase:
three phase
Output Current 3S Peak:
6 A 400 V 3 s
Distance Shaft Shoulder-Flange:
2.5 mm
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Motor Stacks:
2
Stator Inductance:
25.75 mH 20 °C
Stator Resistance:
8.89 Ohm 20 °C
Device Short Name:
BMI
Back Emf Constant:
77.18 V/krpm 20 °C
Mercury Free:
Yes
Shaft Length:
23 mm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
