Schneider Electric BMI0702P27A Mot 3P 70Mm Ip65 790W Nky Enc Mlt 16
SKU:
BMI0702P27A
UPC:
3606485375861
MPN:
Condition:
New
Output Current 3S Peak:
6 A 400 V 3 s
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Centring Collar Diameter:
60 mm
Distance Shaft Shoulder-Flange:
2.5 mm
Circle Diameter Of The Mounting Holes:
75-82 mm
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Electrical Connection:
printed circuit board connector
Mounting Holes Diameter:
5.5 mm
Stator Resistance:
8.89 Ohm 20 °C
Environmental Disclosure:
ENVPEP1312017EN
Back Emf Constant:
77.18 V/krpm 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Number Of Motor Poles:
10
Shaft End:
untapped
Ip Degree Of Protection:
IP65
Product Or Component Type:
servo motor with power stage
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Stator Electrical Time Constant:
2.9 ms 20 °C
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
China Rohs Regulation:
X
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Maximum Axial Force Fa:
0.2 x Fr
Continuous Stall Current:
0.0833333333333333
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
without
Network Frequency Limits:
47.5-63 Hz
Circularity Profile:
ENVEOLI1312017EN
Mercury Free:
Yes
Pvc Free:
Yes
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Motor Flange Size:
70 mm
Stator Inductance:
25.75 mH 20 °C
Sustainable Offer Status:
Green Premium product
Number Of Mounting Holes:
4
Second Shaft:
without second shaft end
Feedback Type:
absolute multiturn SinCos Hiperface
Device Short Name:
BMI
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Emc Filter:
integrated
Continuous Output Current:
2 A 8 kHz
Type Of Cooling:
natural convection
Centring Collar Depth:
2.5 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Supply Frequency:
50/60 Hz - 5...5 %
Mounting Support:
international standard flange
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Warranty:
18 months
Shaft Length:
23 mm
Range Compatibility:
Lexium 32i
Torque Constant:
1.15 N.m/A 20 °C
Phase:
three phase
Length:
268 mm
Rotor Inertia:
1.13 kg.cm²
Number Of Motor Stacks:
2
Maximum Mechanical Speed:
8000 rpm
Supply Voltage Limits:
208-480 V
Rohs Exemption Information:
Yes
Shaft Diameter:
11 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
