Schneider Electric BMI0702P31F Mot 3P 70Mm Ip65 790W Key Enc Sgt 128 Br
SKU:
BMI0702P31F
UPC:
3606485375892
MPN:
Condition:
New
Distance Shaft Shoulder-Flange:
2.5 mm
Warranty:
18 months
Shaft Diameter:
11 mm
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Centring Collar Depth:
2.5 mm
Rotor Inertia:
1.24 kg.cm²
Second Shaft:
without second shaft end
Key Width:
4 mm
Shaft End:
keyed
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Mercury Free:
Yes
Product Or Component Type:
servo motor with power stage
Motor Flange Size:
70 mm
Number Of Motor Stacks:
2
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Rohs Exemption Information:
Yes
Holding Torque:
3 N.m holding brake
Back Emf Constant:
77.18 V/krpm 20 °C
Network Frequency Limits:
47.5-63 Hz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure:
ENVPEP1312017EN
Electrical Connection:
printed circuit board connector
Centring Collar Diameter:
60 mm
Ip Degree Of Protection:
IP65
Supply Frequency:
50/60 Hz - 5...5 %
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Phase:
three phase
Continuous Stall Current:
0.0833333333333333
Number Of Motor Poles:
10
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Holding Brake:
with
China Rohs Regulation:
X
Device Short Name:
BMI
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Circle Diameter Of The Mounting Holes:
75-82 mm
Number Of Mounting Holes:
4
Speed Feedback Resolution:
131072 points/turn
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
Mounting Support:
international standard flange
Stator Inductance:
25.75 mH 20 °C
Circularity Profile:
ENVEOLI1312017EN
Torque Constant:
1.15 N.m/A 20 °C
Length:
306 mm
Range Compatibility:
Lexium 32i
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Sustainable Offer Status:
Green Premium product
Pvc Free:
Yes
Type Of Cooling:
natural convection
Stator Electrical Time Constant:
2.9 ms 20 °C
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Supply Voltage Limits:
208-480 V
Shaft Length:
23 mm
Mounting Holes Diameter:
5.5 mm
Stator Resistance:
8.89 Ohm 20 °C
Output Current 3S Peak:
6 A 400 V 3 s
Maximum Mechanical Speed:
8000 rpm
Emc Filter:
integrated
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Brake Pull-In Power:
5 W
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
