Schneider Electric BMI0702P32A Mot 3P 70Mm Ip65 790W Key Enc Mlt 128
SKU:
BMI0702P32A
UPC:
3606485375908
MPN:
Condition:
New
Supply Voltage Limits:
208-480 V
Shaft End:
keyed
Torque Constant:
1.15 N.m/A 20 °C
Warranty:
18 months
Continuous Stall Current:
0.0833333333333333
Network Frequency Limits:
47.5-63 Hz
Output Current 3S Peak:
6 A 400 V 3 s
Mercury Free:
Yes
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Motor Flange Size:
70 mm
Length:
268 mm
Type Of Cooling:
natural convection
China Rohs Regulation:
X
Circle Diameter Of The Mounting Holes:
75-82 mm
Number Of Motor Stacks:
2
Supply Frequency:
50/60 Hz - 5...5 %
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Pvc Free:
Yes
Nominal Output Power:
400 W 208 V three phase || 800 W 400 V three phase || 900 W 480 V three phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI1312017EN
Phase:
three phase
Shaft Length:
23 mm
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
0.2 x Fr
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Feedback Type:
absolute multiturn SinCos Hiperface
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Electrical Connection:
printed circuit board connector
Sustainable Offer Status:
Green Premium product
Key Width:
4 mm
Product Or Component Type:
servo motor with power stage
Continuous Stall Torque:
2.48 N.m 208...480 V three phase
Peak Stall Torque:
6.8 N.m 208 V three phase || 6.8 N.m 400 V three phase || 6.8 N.m 480 V three phase
Centring Collar Depth:
2.5 mm
Rohs Exemption Information:
Yes
Nominal Speed:
1800 rpm 208 V three phase || 3600 rpm 400 V three phase || 4400 rpm 480 V three phase
Rotor Inertia:
1.13 kg.cm²
Device Short Name:
BMI
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Mounting Support:
international standard flange
Range Compatibility:
Lexium 32i
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Centring Collar Diameter:
60 mm
Environmental Disclosure:
ENVPEP1312017EN
Emc Filter:
integrated
Stator Electrical Time Constant:
2.9 ms 20 °C
Shaft Diameter:
11 mm
Distance Shaft Shoulder-Flange:
2.5 mm
Holding Brake:
without
Second Shaft:
without second shaft end
Stator Resistance:
8.89 Ohm 20 °C
Maximum Mechanical Speed:
8000 rpm
Back Emf Constant:
77.18 V/krpm 20 °C
Number Of Motor Poles:
10
Ip Degree Of Protection:
IP65
Continuous Output Current:
2 A 8 kHz
Stator Inductance:
25.75 mH 20 °C
Maximum Current Irms:
9.6 A 208 V, three phase || 9.6 A 400 V, three phase || 9.6 A 480 V, three phase
Mounting Holes Diameter:
5.5 mm
Nominal Torque:
2.4 N.m 208 V three phase || 2.2 N.m 400 V three phase || 2 N.m 480 V three phase
