Schneider Electric BMI0702T07A Mot 1P 70Mm Ip54 640W Nky Enc Mlt 16
Schneider Electric
$1,351.03
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric BMI0702T07A Mot 1P 70Mm Ip54 640W Nky Enc Mlt 16
servo motor BMI 1-phase - untapped IP54 multiturn - 32768 p/t x 4096 t
- Rohs Exemption Information:
- Yes
- Device Short Name:
- BMI
- Type Of Cooling:
- natural convection
- Continuous Output Current:
- 2.6 A 8 kHz
- Maximum Axial Force Fa:
- 0.2 x Fr
- Emc Filter:
- integrated
- Peak Stall Torque:
- 6.6 N.m 115 V single phase || 6.6 N.m 230 V single phase
- Rotor Inertia:
- 1.13 kg.cm²
- China Rohs Regulation:
- X
- Speed Feedback Resolution:
- 32768 points/turn x 4096 turns
- Output Current 3S Peak:
- 10.5 A 230 V 1 s
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Circularity Profile:
- ENVEOLI1312017EN
- Maximum Mechanical Speed:
- 8000 rpm
- Second Shaft:
- without second shaft end
- Mercury Free:
- Yes
- Length:
- 268 mm
- Stator Inductance:
- 7.8 mH 20 °C
- Mounting Holes Diameter:
- 5.5 mm
- Continuous Stall Torque:
- 2.48 N.m 115...230 V single phase
- Warranty:
- 18 months
- Feedback Type:
- absolute multiturn SinCos Hiperface
- Centring Collar Diameter:
- 60 mm
- Mounting Support:
- international standard flange
- Stator Electrical Time Constant:
- 2.89 ms 20 °C
- Stator Resistance:
- 2.7 Ohm 20 °C
- Circle Diameter Of The Mounting Holes:
- 75-82 mm
- Ip Degree Of Protection:
- shaft IP54 || housing IP65
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Nominal Output Power:
- 700 W 230 V single phase || 400 W 115 V single phase
- Number Of Motor Poles:
- 10
- Phase:
- single phase
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Number Of Motor Stacks:
- 2
- Continuous Stall Current:
- 2.6 A
- Number Of Mounting Holes:
- 4
- Shaft Length:
- 23 mm
- Centring Collar Depth:
- 2.5 mm
- Supply Voltage Limits:
- 100-240 V
- Maximum Radial Force Fr:
- 710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
- Nominal Torque:
- 2.2 N.m 115 V single phase || 1.7 N.m 230 V single phase
- Pvc Free:
- Yes
- Shaft End:
- untapped
- Supply Frequency:
- 50/60 Hz - 5...5 %
- Network Frequency Limits:
- 47.5-63 Hz
- Back Emf Constant:
- 42.1 V/krpm 20 °C
- Range Compatibility:
- Lexium 32i
- Product Compatibility:
- drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
- [Us] Rated Supply Voltage:
- 115...230 V - 15...10 %
- Motor Flange Size:
- 70 mm
- Sustainable Offer Status:
- Green Premium product
- Environmental Disclosure:
- ENVPEP1312017EN
- Distance Shaft Shoulder-Flange:
- 2.5 mm
- Nominal Speed:
- 4000 rpm 230 V single phase || 1700 rpm 115 V single phase
- Maximum Current Irms:
- 17.7 A 230 V, single phase || 17.7 A 115 V, single phase
- Torque Constant:
- 0.63 N.m/A 20 °C
- Product Or Component Type:
- servo motor with power stage
- Electrical Connection:
- printed circuit board connector
- Holding Brake:
- without
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Shaft Diameter:
- 11 mm
- Datasheet:
- View
