Schneider Electric BMI0702T16A Mot 1P 70Mm Ip54 640W Key Enc Sgt 16
SKU:
BMI0702T16A
UPC:
3606485376080
MPN:
Condition:
New
Number Of Motor Stacks:
2
Back Emf Constant:
42.1 V/krpm 20 °C
Continuous Output Current:
2.6 A 8 kHz
Supply Voltage Limits:
100-240 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Warranty:
18 months
Shaft End:
keyed
Maximum Mechanical Speed:
8000 rpm
Peak Stall Torque:
6.6 N.m 115 V single phase || 6.6 N.m 230 V single phase
Stator Inductance:
7.8 mH 20 °C
Shaft Length:
23 mm
Maximum Axial Force Fa:
0.2 x Fr
Second Shaft:
without second shaft end
Length:
268 mm
Stator Electrical Time Constant:
2.89 ms 20 °C
Continuous Stall Torque:
2.48 N.m 115...230 V single phase
Maximum Radial Force Fr:
710 N 1000 rpm || 560 N 2000 rpm || 490 N 3000 rpm || 450 N 4000 rpm || 410 N 5000 rpm || 390 N 6000 rpm
Circularity Profile:
ENVEOLI1312017EN
Sustainable Offer Status:
Green Premium product
Key Width:
4 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Torque Constant:
0.63 N.m/A 20 °C
Supply Frequency:
50/60 Hz - 5...5 %
Mercury Free:
Yes
Product Or Component Type:
servo motor with power stage
Phase:
single phase
Nominal Torque:
2.2 N.m 115 V single phase || 1.7 N.m 230 V single phase
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Motor Flange Size:
70 mm
Environmental Disclosure:
ENVPEP1312017EN
Speed Feedback Resolution:
32768 points/turn
Emc Filter:
integrated
Distance Shaft Shoulder-Flange:
2.5 mm
Number Of Motor Poles:
10
Mounting Holes Diameter:
5.5 mm
Stator Resistance:
2.7 Ohm 20 °C
Maximum Current Irms:
17.7 A 230 V, single phase || 17.7 A 115 V, single phase
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Device Short Name:
BMI
Range Compatibility:
Lexium 32i
Ip Degree Of Protection:
shaft IP54 || housing IP65
Continuous Stall Current:
2.6 A
Electrical Connection:
printed circuit board connector
Network Frequency Limits:
47.5-63 Hz
Pvc Free:
Yes
Centring Collar Diameter:
60 mm
China Rohs Regulation:
X
Mounting Support:
international standard flange
Nominal Speed:
4000 rpm 230 V single phase || 1700 rpm 115 V single phase
Number Of Mounting Holes:
4
Rotor Inertia:
1.13 kg.cm²
Holding Brake:
without
Type Of Cooling:
natural convection
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
Shaft Diameter:
11 mm
Rohs Exemption Information:
Yes
Feedback Type:
absolute single turn SinCos Hiperface
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This product is part of the Lexium 32i range, an offer of servo motors for integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with a maximum...