Schneider Electric BMI0703P17A Mot 3P 70Mm Ip54 860W Key Enc Mlt 16
SKU:
BMI0703P17A
UPC:
3606485376424
MPN:
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Shaft Length:
30 mm
Length:
300 mm
Number Of Mounting Holes:
4
Peak Stall Torque:
8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase
Maximum Current Irms:
12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase
Maximum Mechanical Speed:
8000 rpm
Number Of Motor Poles:
10
China Rohs Regulation:
X
Maximum Axial Force Fa:
0.2 x Fr
Key Width:
5 mm
Second Shaft:
without second shaft end
Shaft End:
keyed
Mounting Support:
international standard flange
Supply Voltage Limits:
208-480 V
Output Current 3S Peak:
6 A 400 V 3 s
Environmental Disclosure:
ENVPEP1312017EN
Rotor Inertia:
1.67 kg.cm²
Holding Brake:
without
Shaft Diameter:
14 mm
Phase:
three phase
Pvc Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Emc Filter:
integrated
Mercury Free:
Yes
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Sustainable Offer Status:
Green Premium product
Number Of Motor Stacks:
3
Rohs Exemption Information:
Yes
Supply Frequency:
50/60 Hz - 5...5 %
Product Or Component Type:
servo motor with power stage
Nominal Torque:
2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase
Continuous Stall Torque:
3.4 N.m 208...480 V three phase
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Device Short Name:
BMI
Back Emf Constant:
95.39 V/krpm 20 °C
Stator Electrical Time Constant:
3.2 ms 20 °C
Circularity Profile:
ENVEOLI1312017EN
Centring Collar Depth:
2.5 mm
Circle Diameter Of The Mounting Holes:
75-82 mm
Type Of Cooling:
natural convection
Stator Resistance:
7.99 Ohm 20 °C
Network Frequency Limits:
47.5-63 Hz
Electrical Connection:
printed circuit board connector
Centring Collar Diameter:
60 mm
Stator Inductance:
25.6 mH 20 °C
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Continuous Stall Current:
0.0833333333333333
Continuous Output Current:
2 A 8 kHz
Motor Flange Size:
70 mm
Nominal Output Power:
900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase
Torque Constant:
1.41 N.m/A 20 °C
Feedback Type:
absolute multiturn SinCos Hiperface
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Speed:
3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Distance Shaft Shoulder-Flange:
2.5 mm
Range Compatibility:
Lexium 32i
Mounting Holes Diameter:
5.5 mm
Ip Degree Of Protection:
shaft IP54 || housing IP65
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
