Schneider Electric BMI0703P32A Mot 3P 70Mm Ip65 860W Key Enc Mlt 128
SKU:
BMI0703P32A
UPC:
3606485376547
MPN:
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Holding Brake:
without
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Circularity Profile:
ENVEOLI1312017EN
Continuous Stall Torque:
3.4 N.m 208...480 V three phase
Length:
300 mm
Back Emf Constant:
95.39 V/krpm 20 °C
Continuous Stall Current:
0.0833333333333333
Stator Inductance:
25.6 mH 20 °C
Centring Collar Depth:
2.5 mm
Supply Voltage Limits:
208-480 V
Pvc Free:
Yes
Nominal Torque:
2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase
Environmental Disclosure:
ENVPEP1312017EN
Centring Collar Diameter:
60 mm
Distance Shaft Shoulder-Flange:
2.5 mm
Sustainable Offer Status:
Green Premium product
Product Or Component Type:
servo motor with power stage
Shaft Length:
30 mm
Mounting Holes Diameter:
5.5 mm
Number Of Motor Stacks:
3
Torque Constant:
1.41 N.m/A 20 °C
Shaft End:
keyed
Network Frequency Limits:
47.5-63 Hz
Peak Stall Torque:
8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase
Ip Degree Of Protection:
IP65
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Nominal Output Power:
900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase
Rohs Exemption Information:
Yes
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Key Width:
5 mm
Electrical Connection:
printed circuit board connector
Rotor Inertia:
1.67 kg.cm²
Nominal Speed:
3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase
Emc Filter:
integrated
Type Of Cooling:
natural convection
Shaft Diameter:
14 mm
Number Of Mounting Holes:
4
Maximum Axial Force Fa:
0.2 x Fr
China Rohs Regulation:
X
Number Of Motor Poles:
10
Output Current 3S Peak:
6 A 400 V 3 s
Stator Electrical Time Constant:
3.2 ms 20 °C
Stator Resistance:
7.99 Ohm 20 °C
Motor Flange Size:
70 mm
Phase:
three phase
Mounting Support:
international standard flange
Maximum Mechanical Speed:
8000 rpm
Maximum Current Irms:
12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase
