Schneider Electric BMI0703P37A Mot 3P 70Mm Ip65 860W Key Enc Mlt 16
SKU:
BMI0703P37A
UPC:
3.60649E+12
MPN:
Condition:
New
Shaft Length:
30 mm
Number Of Mounting Holes:
4
Circle Diameter Of The Mounting Holes:
75-82 mm
Electrical Connection:
printed circuit board connector
Nominal Speed:
3300 rpm 400 V three phase || 1600 rpm 208 V three phase || 3900 rpm 480 V three phase
Continuous Stall Torque:
3.4 N.m 208...480 V three phase
Product Or Component Type:
servo motor with power stage
Stator Electrical Time Constant:
3.2 ms 20 °C
Holding Brake:
without
Continuous Stall Current:
0.0833333333333333
Sustainable Offer Status:
Green Premium product
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Feedback Type:
absolute multiturn SinCos Hiperface
Mounting Support:
international standard flange
Number Of Motor Poles:
10
Supply Frequency:
50/60 Hz - 5...5 %
Mounting Holes Diameter:
5.5 mm
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Type Of Cooling:
natural convection
Warranty:
18 months
Motor Flange Size:
70 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI1312017EN
Distance Shaft Shoulder-Flange:
2.5 mm
China Rohs Regulation:
X
Supply Voltage Limits:
208-480 V
Device Short Name:
BMI
Length:
300 mm
Centring Collar Depth:
2.5 mm
Back Emf Constant:
95.39 V/krpm 20 °C
Environmental Disclosure:
ENVPEP1312017EN
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Rotor Inertia:
1.67 kg.cm²
Shaft Diameter:
14 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Stator Inductance:
25.6 mH 20 °C
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Maximum Mechanical Speed:
8000 rpm
Phase:
three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Rohs Exemption Information:
Yes
Stator Resistance:
7.99 Ohm 20 °C
Peak Stall Torque:
8.6 N.m 208 V three phase || 8.6 N.m 400 V three phase || 8.6 N.m 480 V three phase
Mercury Free:
Yes
Emc Filter:
integrated
Ip Degree Of Protection:
IP65
Second Shaft:
without second shaft end
Output Current 3S Peak:
6 A 400 V 3 s
Key Width:
5 mm
Network Frequency Limits:
47.5-63 Hz
Continuous Output Current:
2 A 8 kHz
Maximum Current Irms:
12.5 A 400 V, three phase || 12.5 A 480 V, three phase || 12.5 A 208 V, three phase
Maximum Axial Force Fa:
0.2 x Fr
Torque Constant:
1.41 N.m/A 20 °C
Number Of Motor Stacks:
3
Centring Collar Diameter:
60 mm
Pvc Free:
Yes
Range Compatibility:
Lexium 32i
Shaft End:
keyed
Nominal Torque:
2.9 N.m 208 V three phase || 2.7 N.m 400 V three phase || 2.3 N.m 480 V three phase
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Nominal Output Power:
900 W 400 V three phase || 900 W 480 V three phase || 450 W 208 V three phase
