Schneider Electric BMI0703T32A Mot 1P 70Mm Ip65 640W Key Enc Mlt 128
SKU:
BMI0703T32A
UPC:
3606485376868
MPN:
Condition:
New
Network Frequency Limits:
47.5-63 Hz
Emc Filter:
integrated
Maximum Mechanical Speed:
8000 rpm
Environmental Disclosure:
ENVPEP1312017EN
Continuous Output Current:
3.5 A 8 kHz
Maximum Axial Force Fa:
0.2 x Fr
Pvc Free:
Yes
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Shaft Length:
30 mm
Ip Degree Of Protection:
IP65
Stator Inductance:
2.28 mH 20 °C
Length:
300 mm
Shaft Diameter:
14 mm
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Nominal Torque:
2.9 N.m 115 V single phase || 2.2 N.m 230 V single phase
Circularity Profile:
ENVEOLI1312017EN
Type Of Cooling:
natural convection
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Device Short Name:
BMI
Shaft End:
keyed
Warranty:
18 months
Rotor Inertia:
1.67 kg.cm²
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Connection:
printed circuit board connector
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Phase:
single phase
Product Or Component Type:
servo motor with power stage
Sustainable Offer Status:
Green Premium product
Key Width:
5 mm
Circle Diameter Of The Mounting Holes:
75-82 mm
Holding Brake:
without
Stator Electrical Time Constant:
0.88 ms 20 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Torque Constant:
0.81 N.m/A 20 °C
Continuous Stall Current:
3.5 A
Mercury Free:
Yes
Output Current 3S Peak:
10.5 A 230 V 3 s
Rohs Exemption Information:
Yes
Number Of Motor Stacks:
3
Peak Stall Torque:
8.6 N.m 115 V single phase || 8.6 N.m 230 V single phase
Distance Shaft Shoulder-Flange:
2.5 mm
Continuous Stall Torque:
3.4 N.m 115...230 V single phase
Maximum Radial Force Fr:
730 N 1000 rpm || 580 N 2000 rpm || 510 N 3000 rpm || 460 N 4000 rpm || 430 N 5000 rpm || 400 N 6000 rpm
Maximum Current Irms:
17.8 A 115 V, single phase || 17.8 A 230 V, single phase
Second Shaft:
without second shaft end
Stator Resistance:
2.58 Ohm 20 °C
Mounting Support:
international standard flange
Number Of Motor Poles:
10
Nominal Speed:
3200 rpm 230 V single phase || 1400 rpm 115 V single phase
Supply Frequency:
50/60 Hz - 5...5 %
Motor Flange Size:
70 mm
Feedback Type:
absolute multiturn SinCos Hiperface
Back Emf Constant:
54.44 V/krpm 20 °C
Mounting Holes Diameter:
5.5 mm
Number Of Mounting Holes:
4
Supply Voltage Limits:
100-240 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Output Power:
700 W 230 V single phase || 400 W 115 V single phase
