Schneider Electric BMI1002T31A Mot 1P 100Mm Ip65 1,3Kw Key Enc Sgt 128
SKU:
BMI1002T31A
UPC:
3.60649E+12
MPN:
Condition:
New
Emc Filter:
integrated
Mounting Holes Diameter:
9 mm
Torque Constant:
0.89 N.m/A 20 °C
Stator Electrical Time Constant:
4.35 ms 20 °C
Sustainable Offer Status:
Green Premium product
Continuous Stall Torque:
6 N.m 115...230 V single phase
Mercury Free:
Yes
Maximum Current Irms:
30 A 115 V, single phase || 30 A 230 V, single phase
China Rohs Regulation:
X
Length:
273 mm
Motor Flange Size:
100 mm
Circularity Profile:
ENVEOLI1312017EN
Rohs Exemption Information:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Number Of Mounting Holes:
4
Electrical Connection:
printed circuit board connector
Nominal Torque:
5.4 N.m 115 V single phase || 4.4 N.m 230 V single phase
Pvc Free:
Yes
Mounting Support:
international standard flange
Network Frequency Limits:
47.5-63 Hz
Continuous Output Current:
6 A 8 kHz
Range Compatibility:
Lexium 32i
Nominal Speed:
1400 rpm 115 V single phase || 3000 rpm 230 V single phase
Speed Feedback Resolution:
131072 points/turn
Supply Frequency:
50/60 Hz - 5...5 %
Centring Collar Depth:
3.5 mm
Shaft Length:
40 mm
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
BMI
Second Shaft:
without second shaft end
Stator Resistance:
1.08 Ohm 20 °C
Maximum Radial Force Fr:
990 N 1000 rpm || 790 N 2000 rpm || 690 N 3000 rpm || 620 N 4000 rpm || 580 N 5000 rpm
Shaft Diameter:
19 mm
[Us] Rated Supply Voltage:
115...230 V - 15...10 %
Circle Diameter Of The Mounting Holes:
115-115 mm
Distance Shaft Shoulder-Flange:
3.5 mm
Nominal Output Power:
750 W 115 V single phase || 1300 W 230 V single phase
Product Or Component Type:
servo motor with power stage
Centring Collar Diameter:
95 mm
Ip Degree Of Protection:
IP65
Back Emf Constant:
58.5 V/krpm 20 °C
Rotor Inertia:
6.28 kg.cm²
Environmental Disclosure:
ENVPEP1312017EN
Type Of Cooling:
natural convection
Continuous Stall Current:
0.25
Maximum Mechanical Speed:
6000 rpm
Phase:
single phase
Number Of Motor Stacks:
2
Shaft End:
keyed
Number Of Motor Poles:
10
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Holding Brake:
without
Stator Inductance:
4.7 mH 20 °C
Peak Stall Torque:
14.5 N.m 115 V single phase || 14.5 N.m 230 V single phase
Key Width:
6 mm
Supply Voltage Limits:
100-240 V
Feedback Type:
absolute single turn SinCos Hiperface
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
