Schneider Electric BMI1003P17A Mot 3P 100Mm Ip54 2,2Kw Key Enc Mlt 16
SKU:
BMI1003P17A
UPC:
3.60649E+12
MPN:
Condition:
New
Output Current 3S Peak:
12 A 400 V 3 s
Back Emf Constant:
112 V/krpm 20 °C
Mounting Support:
international standard flange
Peak Stall Torque:
19.2 N.m 400 V three phase || 19.2 N.m 480 V three phase || 19.2 N.m 208 V three phase
Second Shaft:
without second shaft end
Nominal Output Power:
1000 W 208 V three phase || 2000 W 400 V three phase || 2100 W 480 V three phase
Torque Constant:
1.7 N.m/A 20 °C
Device Short Name:
BMI
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rotor Inertia:
9.37 kg.cm²
Shaft End:
keyed
Electrical Connection:
printed circuit board connector
Supply Frequency:
50/60 Hz - 5...5 %
Phase:
three phase
Mercury Free:
Yes
Stator Resistance:
2.31 Ohm 20 °C
Distance Shaft Shoulder-Flange:
3.5 mm
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Range Compatibility:
Lexium 32i
Stator Inductance:
11.43 mH 20 °C
Maximum Mechanical Speed:
6000 rpm
Length:
299 mm
Mounting Holes Diameter:
9 mm
Continuous Stall Torque:
8.5 N.m 208...480 V three phase
China Rohs Regulation:
X
Emc Filter:
integrated
Circle Diameter Of The Mounting Holes:
115-115 mm
Pvc Free:
Yes
Number Of Motor Poles:
10
Centring Collar Depth:
3.5 mm
Holding Brake:
without
Number Of Motor Stacks:
3
Circularity Profile:
ENVEOLI1312017EN
Stator Electrical Time Constant:
4.95 ms 20 °C
Feedback Type:
absolute multiturn SinCos Hiperface
Maximum Current Irms:
26.7 A 208 V, three phase || 26.7 A 400 V, three phase || 26.7 A 480 V, three phase
Motor Flange Size:
100 mm
Warranty:
18 months
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Supply Voltage Limits:
208-480 V
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Continuous Stall Current:
0.166666666666667
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
7.2 N.m 208 V three phase || 6.8 N.m 400 V three phase || 5.6 N.m 480 V three phase
Key Width:
6 mm
Ip Degree Of Protection:
shaft IP54 || housing IP65
Sustainable Offer Status:
Green Premium product
Continuous Output Current:
4 A 8 kHz
Centring Collar Diameter:
95 mm
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP1312017EN
Product Or Component Type:
servo motor with power stage
Maximum Axial Force Fa:
0.2 x Fr
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Type Of Cooling:
natural convection
Network Frequency Limits:
47.5-63 Hz
Shaft Diameter:
19 mm
Nominal Speed:
1500 rpm 208 V three phase || 3000 rpm 400 V three phase || 3700 rpm 480 V three phase
Number Of Mounting Holes:
4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of...