Schneider Electric BMI1003P27F Mot 3P 100Mm Ip65 2,2Kw Nky Enc Mlt 16
SKU:
BMI1003P27F
UPC:
3606485377797
MPN:
Condition:
New
Shaft Diameter:
19 mm
Warranty:
18 months
Maximum Current Irms:
26.7 A 208 V, three phase || 26.7 A 400 V, three phase || 26.7 A 480 V, three phase
Circle Diameter Of The Mounting Holes:
115-115 mm
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Supply Voltage Limits:
208-480 V
Nominal Speed:
1500 rpm 208 V three phase || 3000 rpm 400 V three phase || 3700 rpm 480 V three phase
Number Of Mounting Holes:
4
Pvc Free:
Yes
Continuous Stall Current:
0.166666666666667
Peak Stall Torque:
19.2 N.m 400 V three phase || 19.2 N.m 480 V three phase || 19.2 N.m 208 V three phase
Second Shaft:
without second shaft end
Phase:
three phase
Brake Pull-In Power:
8 W
Output Current 3S Peak:
12 A 400 V 3 s
Maximum Mechanical Speed:
6000 rpm
Shaft End:
untapped
Supply Frequency:
50/60 Hz - 5...5 %
Network Frequency Limits:
47.5-63 Hz
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Centring Collar Diameter:
95 mm
Circularity Profile:
ENVEOLI1312017EN
Mercury Free:
Yes
Stator Electrical Time Constant:
4.95 ms 20 °C
Ip Degree Of Protection:
IP65
Emc Filter:
integrated
Shaft Length:
40 mm
China Rohs Regulation:
X
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Holes Diameter:
9 mm
Torque Constant:
1.7 N.m/A 20 °C
Sustainable Offer Status:
Green Premium product
Device Short Name:
BMI
Type Of Cooling:
natural convection
Electrical Connection:
printed circuit board connector
Nominal Output Power:
1000 W 208 V three phase || 2000 W 400 V three phase || 2100 W 480 V three phase
Holding Brake:
with
Number Of Motor Poles:
10
Mounting Support:
international standard flange
Speed Feedback Resolution:
32768 points/turn x 4096 turns
Holding Torque:
9 N.m holding brake
Rohs Exemption Information:
Yes
Back Emf Constant:
112 V/krpm 20 °C
Continuous Output Current:
4 A 8 kHz
Continuous Stall Torque:
8.5 N.m 208...480 V three phase
Feedback Type:
absolute multiturn SinCos Hiperface
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Disclosure:
ENVPEP1312017EN
Centring Collar Depth:
3.5 mm
Stator Inductance:
11.43 mH 20 °C
Rotor Inertia:
10.3 kg.cm²
Maximum Axial Force Fa:
0.2 x Fr
Range Compatibility:
Lexium 32i
Number Of Motor Stacks:
3
Stator Resistance:
2.31 Ohm 20 °C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Distance Shaft Shoulder-Flange:
3.5 mm
Length:
338 mm
Motor Flange Size:
100 mm
Product Or Component Type:
servo motor with power stage
Nominal Torque:
7.2 N.m 208 V three phase || 6.8 N.m 400 V three phase || 5.6 N.m 480 V three phase
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
This product is part of the Lexium 32i range, an offer integrated servo drive from 0.6kW to 2.2kW. The 10-pole servo motor features a medium moment of inertia with maximum mechanical speed of...
