Schneider Electric BMI1003P32F Mot 3P 100Mm Ip65 2,2Kw Key Enc Mlt 128
Schneider Electric
$4,053.09
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
servo motor BMI 3-phase - keyed IP65 multiturn - 131072 p/t x 4096 t - brake
- [Us] Rated Supply Voltage:
- 208...480 V - 15...10 %
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Range Compatibility:
- Lexium 32i
- Nominal Torque:
- 7.2 N.m 208 V three phase || 6.8 N.m 400 V three phase || 5.6 N.m 480 V three phase
- Second Shaft:
- without second shaft end
- Environmental Disclosure:
- ENVPEP1312017EN
- Continuous Output Current:
- 4 A 8 kHz
- Output Current 3S Peak:
- 12 A 400 V 3 s
- Maximum Current Irms:
- 26.7 A 208 V, three phase || 26.7 A 400 V, three phase || 26.7 A 480 V, three phase
- Feedback Type:
- absolute multiturn SinCos Hiperface
- Stator Inductance:
- 11.43 mH 20 °C
- China Rohs Regulation:
- X
- Supply Voltage Limits:
- 208-480 V
- Speed Feedback Resolution:
- 131072 points/turn x 4096 turns
- Distance Shaft Shoulder-Flange:
- 3.5 mm
- Holding Brake:
- with
- Device Short Name:
- BMI
- Key Width:
- 6 mm
- Circularity Profile:
- ENVEOLI1312017EN
- Mercury Free:
- Yes
- Phase:
- three phase
- Circle Diameter Of The Mounting Holes:
- 115-115 mm
- Rohs Exemption Information:
- Yes
- Torque Constant:
- 1.7 N.m/A 20 °C
- Motor Flange Size:
- 100 mm
- Stator Electrical Time Constant:
- 4.95 ms 20 °C
- Pvc Free:
- Yes
- Stator Resistance:
- 2.31 Ohm 20 °C
- Peak Stall Torque:
- 19.2 N.m 400 V three phase || 19.2 N.m 480 V three phase || 19.2 N.m 208 V three phase
- Number Of Motor Poles:
- 10
- Rotor Inertia:
- 10.3 kg.cm²
- Nominal Speed:
- 1500 rpm 208 V three phase || 3000 rpm 400 V three phase || 3700 rpm 480 V three phase
- Maximum Mechanical Speed:
- 6000 rpm
- Ip Degree Of Protection:
- IP65
- Product Compatibility:
- drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
- Network Frequency Limits:
- 47.5-63 Hz
- Centring Collar Diameter:
- 95 mm
- Electrical Connection:
- printed circuit board connector
- Number Of Mounting Holes:
- 4
- Maximum Axial Force Fa:
- 0.2 x Fr
- Shaft Length:
- 40 mm
- Maximum Radial Force Fr:
- 1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Product Or Component Type:
- servo motor with power stage
- Sustainable Offer Status:
- Green Premium product
- Datasheet:
- View
