Schneider Electric BMI1003P37A Mot 3P 100Mm Ip65 2,2Kw Key Enc Mlt 16
SKU:
BMI1003P37A
UPC:
3606485377865
MPN:
Condition:
New
Circularity Profile:
ENVEOLI1312017EN
Range Compatibility:
Lexium 32i
Rohs Exemption Information:
Yes
Back Emf Constant:
112 V/krpm 20 °C
Warranty:
18 months
Network Frequency Limits:
47.5-63 Hz
Output Current 3S Peak:
12 A 400 V 3 s
Torque Constant:
1.7 N.m/A 20 °C
Nominal Speed:
1500 rpm 208 V three phase || 3000 rpm 400 V three phase || 3700 rpm 480 V three phase
Type Of Cooling:
natural convection
Supply Voltage Limits:
208-480 V
[Us] Rated Supply Voltage:
208...480 V - 15...10 %
Motor Flange Size:
100 mm
Environmental Disclosure:
ENVPEP1312017EN
Number Of Motor Poles:
10
Mercury Free:
Yes
Number Of Mounting Holes:
4
Key Width:
6 mm
Continuous Stall Torque:
8.5 N.m 208...480 V three phase
Ip Degree Of Protection:
IP65
Electrical Connection:
printed circuit board connector
Nominal Output Power:
1000 W 208 V three phase || 2000 W 400 V three phase || 2100 W 480 V three phase
Feedback Type:
absolute multiturn SinCos Hiperface
China Rohs Regulation:
X
Maximum Radial Force Fr:
1050 N 1000 rpm || 830 N 2000 rpm || 730 N 3000 rpm || 660 N 4000 rpm || 610 N 5000 rpm
Shaft Length:
40 mm
Centring Collar Depth:
3.5 mm
Maximum Mechanical Speed:
6000 rpm
Distance Shaft Shoulder-Flange:
3.5 mm
Stator Resistance:
2.31 Ohm 20 °C
Sustainable Offer Status:
Green Premium product
Number Of Motor Stacks:
3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Rotor Inertia:
9.37 kg.cm²
Mounting Holes Diameter:
9 mm
Peak Stall Torque:
19.2 N.m 400 V three phase || 19.2 N.m 480 V three phase || 19.2 N.m 208 V three phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
BMI
Stator Electrical Time Constant:
4.95 ms 20 °C
Product Compatibility:
drive control unit LXM32i CANopen || drive control unit LXM32i EtherCAT
Second Shaft:
without second shaft end
Continuous Stall Current:
0.166666666666667
Shaft End:
keyed
Maximum Axial Force Fa:
0.2 x Fr
Nominal Torque:
7.2 N.m 208 V three phase || 6.8 N.m 400 V three phase || 5.6 N.m 480 V three phase
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Centring Collar Diameter:
95 mm
Phase:
three phase
Emc Filter:
integrated
Pvc Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mounting Support:
international standard flange
Holding Brake:
without
Continuous Output Current:
4 A 8 kHz
Supply Frequency:
50/60 Hz - 5...5 %
Product Or Component Type:
servo motor with power stage
Maximum Current Irms:
26.7 A 208 V, three phase || 26.7 A 400 V, three phase || 26.7 A 480 V, three phase
