Schneider Electric BRS39AW660FBA Lexium Stepper Motor, Size 90, 4.52 Nm,
SKU:
BRS39AW660FBA
UPC:
3389119223850
MPN:
Condition:
New
Vibration Resistance:
20 m/s² maximum || A EN/IEC 60034-14
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Centring Collar Diameter:
60 mm
Relative Humidity:
15-85 % without condensation
Maximum Mechanical Speed:
3000 rpm
Maximum Radial Force Fr:
110 N first shaft end) || 50 N second shaft end)
Supply Voltage Limits:
230-230 V AC || 325-325 V DC
Type Of Cooling:
natural convection
Resistance:
0.55 Ohm winding)
Shaft Length:
30 mm
Mounting Holes Diameter:
6.5 mm
Maximum Axial Force Fa:
175 N tensile force) || 30 N force pressure)
Temperature Class:
F winding IEC/EN 60034-1
Shaft Diameter:
12 mm
Sustainable Offer Status:
Green Premium product
Service Life In Hours:
20000 h bearing)
Circularity Profile:
N/A
Holding Torque:
4.8 N.m
Holding Brake:
with
Mounting Support:
flange
Device Short Name:
BRS3
Ambient Air Temperature For Operation:
-25-40 °C
Net Weight:
3.2 kg
Pvc Free:
Yes
Accuracy Error:
+/- 6 arc min
Rohs Exemption Information:
Yes
China Rohs Regulation:
X
Ip Degree Of Protection:
total except shaft bushing IP56 EN/IEC 60034-5 || shaft bushing without shaft seal ring IP41 EN/IEC 60034-5
Line Rated Current:
5.8 A
Second Shaft:
without second shaft end
Angular Acceleration:
200000 rad/s²
Resolution:
1.8 °, 0.9 °, 0.72 °, 0.36 °, 0.18 °, 0.09 °, 0.072 °, 0.036 ° step angle || 200, 400, 500, 1000, 2000, 4000, 5000, 10000 steps number of full steps per revolution
Number Of Motor Poles:
6
Number Of Mounting Holes:
4
Shaft End:
woodruff key
Standards:
EN 50347 || IEC 60072-1
Environmental Disclosure:
ENVPEP111101EN
Length:
187 mm
Nominal Torque:
4 N.m
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Time Constant:
9 ms
Operating Altitude:
<= 3280.84 ft (1000 m) without power derating
Ambient Air Temperature For Storage:
-25-70 °C
Range Compatibility:
Lexium SD3
Circle Diameter Of The Mounting Holes:
98.99 mm
Maximum Starting Frequency:
5.3 kHz
Mercury Free:
Yes
Product Or Component Type:
motion control motor
Motor Flange Size:
85 mm
Rotor Inertia:
2.2 kg.cm²
Centring Collar Depth:
2 mm
Motor Type:
3-phase stepper motor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
This product is part of the Lexium SD3 and motors an offer of 3-phase stepper drives and stepper motors. The 6-pole stepper motor features 12mm woodruff key, centring collar of 60mm, without holding...
