Schneider Electric BSH0401P26F2A Motor 40Mm Iec 0,18Nm 170W Ip65 No Key S
SKU:
BSH0401P26F2A
UPC:
3.60649E+12
MPN:
Condition:
New
Mercury Free:
Yes
Back Emf Constant:
13.6 V/krpm 20 °C
Continuous Stall Current:
1.12 A
Continuous Power:
220 W
Length:
99.4 mm
Stator Resistance:
17.2 Ohm 20 °C
Torque Constant:
0.19 N.m/A 120 °C
China Rohs Regulation:
X
Shaft Length:
25 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electrical Connection:
rotatable right-angled connectors
Mounting Holes Diameter:
4.5 mm
Shaft Diameter:
8 mm
Stator Inductance:
14.6 mH 20 °C
Peak Stall Torque:
0.8 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.8 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.8 N.m LXM32.U45M2 1.5 A, 230 V, single phase
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
international standard flange
Feedback Type:
single turn SinCos Hiperface
Nominal Output Power:
166 W LXM32.U60N4 1.5 A, 480 V, three phase || 166 W LXM32.U60N4 1.5 A, 400 V, three phase || 77 W LXM32.U45M2 1.5 A, 230 V, single phase
Centring Collar Depth:
2.5 mm
Device Short Name:
BSH
Number Of Motor Stacks:
1
Motor Flange Size:
40 mm
Brake Pull-In Power:
5.8 W
Product Or Component Type:
servo motor
Stator Electrical Time Constant:
0.85 ms 20 °C
Number Of Motor Poles:
10
Range Compatibility:
Lexium 32
Speed Feedback Resolution:
32768 points/turn
Continuous Stall Torque:
0.21 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.21 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.21 N.m LXM32.U45M2 1.5 A, 230 V, single phase
Maximum Current Irms:
4.7 A LXM32.U60N4 480 V || 4.7 A LXM32.U60N4 400 V || 4.7 A LXM32.U45M2 230 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Axial Force Fa:
0.2 x Fr
Circle Diameter Of The Mounting Holes:
46 mm
Holding Brake:
with
[Us] Rated Supply Voltage:
400 V
Phase:
three phase
Second Shaft:
without second shaft end
Shaft End:
smooth shaft
Type Of Cooling:
natural convection
Nominal Speed:
9000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 9000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 4000 rpm LXM32.U45M2 1.5 A, 230 V, single phase
Rohs Exemption Information:
Yes
Holding Torque:
0.4 N.m holding brake
Number Of Mounting Holes:
4
Net Weight:
0.6 kg
Nominal Torque:
0.176 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.176 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.184 N.m LXM32.U45M2 1.5 A, 230 V, single phase
Centring Collar Diameter:
30 mm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
