Schneider Electric BSH0551P32A2A Bsh Motor Iec 55Mm 0,5 Nm With Key Ip65
SKU:
BSH0551P32A2A
UPC:
3389118198791
MPN:
Condition:
New
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Holding Brake:
without
Number Of Motor Poles:
6
Second Shaft:
without second shaft end
Switching Frequency:
8 kHz
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Phase:
three phase
Centring Collar Depth:
2 mm
Centring Collar Diameter:
40 mm
Pvc Free:
Yes
Nominal Speed:
6000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 6000 rpm LXM32.U60N4 1.5 A, 480 V, three phase || 4000 rpm LXM15LD13M3, 230 V, single phase || 4000 rpm LXM15LU60N4, 230 V, three phase
Type Of Cooling:
natural convection
Speed Feedback Resolution:
131072 points/turn x 4096 turns
Circle Diameter Of The Mounting Holes:
63 mm
Mercury Free:
Yes
Key Width:
12 mm
Shaft End:
keyed
Number Of Motor Stacks:
1
Electrical Connection:
rotatable right-angled connectors
Feedback Type:
multiturn SinCos Hiperface
Product Or Component Type:
servo motor
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Shaft Diameter:
9 mm
Continuous Stall Current:
0.73 A
Stator Resistance:
41.8 Ohm 20 °C
Rohs Exemption Information:
Yes
Environmental Disclosure:
ENVPEP111049EN
Warranty:
18 months
Maximum Axial Force Fa:
0.2 x Fr
Device Short Name:
BSH
Rotor Inertia:
0.059 kg.cm²
Continuous Power:
0.45 W
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Radial Force Fr:
170 N 8000 rpm || 180 N 7000 rpm || 190 N 6000 rpm || 200 N 5000 rpm || 220 N 4000 rpm || 240 N 3000 rpm || 270 N 2000 rpm || 340 N 1000 rpm
Continuous Stall Torque:
0.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.5 N.m LXM15LD13M3, 230 V, single phase || 0.5 N.m LXM15LU60N4, 230 V, three phase
Range Compatibility:
Lexium 32 || Lexium 15
Length:
132.5 mm
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
China Rohs Regulation:
X
Maximum Mechanical Speed:
9000 rpm
Torque Constant:
0.7 N.m/A 120 °C
Shaft Length:
20 mm
Product Compatibility:
LXM15LD13M3 230 V single phase || LXM15LU60N4 230 V three phase || LXM32.U60N4 400 V three phase || LXM32.U60N4 480 V three phase
Peak Stall Torque:
1.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 1.5 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 1.4 N.m LXM15LD13M3, 230 V, single phase || 1.4 N.m LXM15LU60N4, 230 V, three phase
Maximum Current Irms:
3.5 A LXM15LD13M3 || 3.5 A LXM15LU60N4 || 2.9 A LXM32.U60N4
Number Of Mounting Holes:
4
Stator Electrical Time Constant:
1.09 ms 20 °C
Nominal Torque:
0.48 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.48 N.m LXM32.U60N4 1.5 A, 480 V, three phase || 0.46 N.m LXM15LD13M3, 230 V, single phase || 0.46 N.m LXM15LU60N4, 230 V, three phase
Mounting Support:
international standard flange
Nominal Output Power:
300 W LXM32.U60N4 1.5 A, 400 V, three phase || 300 W LXM32.U60N4 1.5 A, 480 V, three phase || 170 W LXM15LD13M3, 230 V, single phase || 170 W LXM15LU60N4, 230 V, three phase
