Schneider Electric BSH0552P11A2A Bsh Motor Iec 55Mm 0,9 Nm With Key Ip50
SKU:
BSH0552P11A2A
UPC:
3389118158733
MPN:
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Type Of Cooling:
natural convection
Centring Collar Depth:
2 mm
Maximum Permanent Current:
4.8 A
Shaft Length:
20 mm
Device Short Name:
BSH
Environmental Disclosure:
ENVPEP111049EN
Net Weight:
1.5 kg
Key Width:
12 mm
Continuous Stall Torque:
0.8 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.9 N.m LXM15LD13M3, 230 V, single phase || 0.9 N.m LXM15LD13M3, 230 V, three phase || 0.9 N.m LXM15LU60N4, 230 V, three phase || 0.9 N.m LXM05AD14N4, 380...480 V, three phase || 0.9 N.m LXM05BD14N4, 3
Number Of Motor Poles:
6
Mercury Free:
Yes
Stator Resistance:
17.4 Ohm 20 °C
Phase:
three phase
Nominal Output Power:
400 W LXM32.U60N4 1.5 A, 400 V, three phase || 250 W LXM05BD10M3X, 200...240 V, three phase || 250 W LXM05BD14N4, 380...480 V, three phase || 250 W LXM05CD10M3X, 200...240 V, three phase || 250 W LXM05CD14N4, 380...480 V, three phase || 310 W LXM15LD
Range Compatibility:
Lexium 05 || Lexium 15 || Lexium 32
Second Shaft:
without second shaft end
Number Of Mounting Holes:
4
Nominal Speed:
6000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 3000 rpm LXM05AD14N4, 380...480 V, three phase || 3000 rpm LXM05BD10M3X, 200...240 V, three phase || 3000 rpm LXM05BD14N4, 380...480 V, three phase || 3000 rpm LXM05CD10M3X, 200...240 V, three phase |
Peak Stall Torque:
2.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 2.7 N.m LXM05AD10M3X, 200...240 V, three phase || 2.7 N.m LXM05AD14N4, 380...480 V, three phase || 2.7 N.m LXM05BD10M3X, 200...240 V, three phase || 2.7 N.m LXM05BD14N4, 380...480 V, three phase || 2.7
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Back Emf Constant:
40 V/krpm 120 °C
Mounting Support:
international standard flange
Length:
154.4 mm
Nominal Torque:
0.65 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 2.7 N.m LXM05AD10M3X, 200...240 V, three phase || 2.7 N.m LXM05AD14N4, 380...480 V, three phase || 2.7 N.m LXM05BD10M3X, 200...240 V, three phase || 2.7 N.m LXM05BD14N4, 380...480 V, three phase || 2.
Mounting Holes Diameter:
5.5 mm
Product Or Component Type:
servo motor
Maximum Axial Force Fa:
0.2 x Fr
Rohs Exemption Information:
Yes
Product Compatibility:
LXM05AD10M2 200...240 V single phase || LXM05BD10M3X 200...240 V three phase || LXM05CD10M3X 200...240 V three phase || LXM15LD13M3 230 V three phase || LXM05AD14N4 380...480 V three phase || LXM05BD14N4 380...480 V three phase || LXM05CD14N4 380...4
Shaft End:
keyed
Number Of Motor Stacks:
2
Ip Degree Of Protection:
IP50 standard
Switching Frequency:
8 kHz
Continuous Power:
0.67 W
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Stator Electrical Time Constant:
2.03 ms 20 °C
Maximum Current Irms:
5.9 A LXM15LD13M3 || 4.8 A LXM05CD10M2 || 4.8 A LXM05CD10M3X || 4.8 A LXM05CD14N4 || 4.8 A LXM32.U60N4 || 5.9 A LXM15LU60N4 || 4.8 A LXM05CU70M2 || 4.8 A LXM05AD10M2 || 4.8 A LXM05AD10M3X || 4.8 A LXM05AD14N4 || 4.8 A LXM05BD10M2 || 4.8 A LXM05BD10M3
Feedback Type:
single turn SinCos Hiperface
Maximum Radial Force Fr:
190 N 7000 rpm || 190 N 8000 rpm || 200 N 6000 rpm || 220 N 5000 rpm || 230 N 4000 rpm || 260 N 3000 rpm || 290 N 2000 rpm || 370 N 1000 rpm
Circle Diameter Of The Mounting Holes:
63 mm
Electrical Connection:
rotatable right-angled connectors
Torque Constant:
0.7 N.m/A 120 °C
Maximum Mechanical Speed:
9000 rpm
Continuous Stall Current:
1.2 A
Rotor Inertia:
0.096 kg.cm²
Holding Brake:
without
Stator Inductance:
35.3 mH 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
