Schneider Electric BSH0552P21F1A Bsh Motor Iec 55Mm 0,9 Nm Wo Key Ip65 Si
SKU:
BSH0552P21F1A
UPC:
3.38912E+12
MPN:
Condition:
New
Centring Collar Depth:
2 mm
Circle Diameter Of The Mounting Holes:
63 mm
Shaft Diameter:
9 mm
Rohs Exemption Information:
Yes
Warranty:
18 months
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Output Power:
400 W LXM32.U60N4 1.5 A, 400 V, three phase || 250 W LXM05BD10M3X, 200...240 V, three phase || 250 W LXM05BD14N4, 380...480 V, three phase || 250 W LXM05CD10M3X, 200...240 V, three phase || 250 W LXM05CD14N4, 380...480 V, three phase || 310 W LXM15LD
Continuous Stall Torque:
0.8 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 0.9 N.m LXM15LD13M3, 230 V, single phase || 0.9 N.m LXM15LD13M3, 230 V, three phase || 0.9 N.m LXM15LU60N4, 230 V, three phase || 0.9 N.m LXM05AD14N4, 380...480 V, three phase || 0.9 N.m LXM05BD14N4, 3
Nominal Torque:
0.65 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 2.7 N.m LXM05AD10M3X, 200...240 V, three phase || 2.7 N.m LXM05AD14N4, 380...480 V, three phase || 2.7 N.m LXM05BD10M3X, 200...240 V, three phase || 2.7 N.m LXM05BD14N4, 380...480 V, three phase || 2.
Continuous Stall Current:
1.2 A
Ip Degree Of Protection:
IP65 standard || IP67 with IP67 kit
Stator Electrical Time Constant:
2.03 ms 20 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Number Of Motor Poles:
6
Holding Torque:
0.8 N.m holding brake
Shaft Length:
20 mm
Brake Pull-In Power:
10 W
Device Short Name:
BSH
Maximum Mechanical Speed:
9000 rpm
Mounting Holes Diameter:
5.5 mm
Net Weight:
1.6 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov
Phase:
three phase
Speed Feedback Resolution:
131072 points/turn
Maximum Current Irms:
5.9 A LXM15LD13M3 || 4.8 A LXM05CD10M2 || 4.8 A LXM05CD10M3X || 4.8 A LXM05CD14N4 || 4.8 A LXM32.U60N4 || 5.9 A LXM15LU60N4 || 4.8 A LXM05CU70M2 || 4.8 A LXM05AD10M2 || 4.8 A LXM05AD10M3X || 4.8 A LXM05AD14N4 || 4.8 A LXM05BD10M2 || 4.8 A LXM05BD10M3
Peak Stall Torque:
2.5 N.m LXM32.U60N4 1.5 A, 400 V, three phase || 2.7 N.m LXM05AD10M3X, 200...240 V, three phase || 2.7 N.m LXM05AD14N4, 380...480 V, three phase || 2.7 N.m LXM05BD10M3X, 200...240 V, three phase || 2.7 N.m LXM05BD14N4, 380...480 V, three phase || 2.7
Number Of Mounting Holes:
4
Number Of Motor Stacks:
2
Nominal Speed:
6000 rpm LXM32.U60N4 1.5 A, 400 V, three phase || 3000 rpm LXM05AD14N4, 380...480 V, three phase || 3000 rpm LXM05BD10M3X, 200...240 V, three phase || 3000 rpm LXM05BD14N4, 380...480 V, three phase || 3000 rpm LXM05CD10M3X, 200...240 V, three phase |
Continuous Power:
0.67 W
Shaft End:
untapped
Length:
181 mm
Mercury Free:
Yes
Maximum Axial Force Fa:
0.2 x Fr
Environmental Disclosure:
ENVPEP111049EN
Torque Constant:
0.7 N.m/A 120 °C
Holding Brake:
with
Range Compatibility:
Lexium 05 || Lexium 32 || Lexium 15
Product Compatibility:
LXM05AD10M2 200...240 V single phase || LXM05BD10M3X 200...240 V three phase || LXM05CD10M3X 200...240 V three phase || LXM15LD13M3 230 V three phase || LXM05AD14N4 380...480 V three phase || LXM05BD14N4 380...480 V three phase || LXM05CD14N4 380...4
Stator Resistance:
17.4 Ohm 20 °C
Feedback Type:
single turn SinCos Hiperface
Maximum Permanent Current:
4.8 A
Type Of Cooling:
natural convection
Maximum Radial Force Fr:
190 N 7000 rpm || 190 N 8000 rpm || 200 N 6000 rpm || 220 N 5000 rpm || 230 N 4000 rpm || 260 N 3000 rpm || 290 N 2000 rpm || 370 N 1000 rpm
