- Mounting Support:
- international standard flange
- Nominal Speed:
- 3000 rpm LXM32.D72N4 24 A, 400 V, three phase || 3000 rpm LXM32.D72N4 24 A, 480 V, three phase || 3000 rpm LXM05AD42M3X, 200...240 V, three phase || 3000 rpm LXM05BD42M3X, 200...240 V, three phase || 3000 rpm LXM05CD42M3X, 200...240 V, three phase
- Number Of Mounting Holes:
- 4
- Phase:
- three phase
- Holding Brake:
- with
- [Us] Rated Supply Voltage:
- 480 V
- China Rohs Regulation:
- X
- Mercury Free:
- Yes
- Nominal Output Power:
- 3900 W LXM32.D72N4 24 A, 400 V, three phase || 3900 W LXM32.D72N4 24 A, 480 V, three phase || 2900 W LXM05AD42M3X, 200...240 V, three phase || 2900 W LXM05BD42M3X, 200...240 V, three phase || 2900 W LXM05CD42M3X, 200...240 V, three phase
- Maximum Mechanical Speed:
- 4000 rpm
- Centring Collar Depth:
- 3.5 mm
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Maximum Radial Force Fr:
- 1680 N 3000 rpm || 1930 N 2000 rpm || 2430 N 1000 rpm
- Maximum Axial Force Fa:
- 0.2 x Fr
- Rohs Exemption Information:
- Yes
- Stator Inductance:
- 7.4 mH 20 °C
- Device Short Name:
- BSH
- Circle Diameter Of The Mounting Holes:
- 165 mm
- Switching Frequency:
- 8 kHz
- Stator Resistance:
- 0.6 Ohm 20 °C
- Continuous Power:
- 4.2 W
- Rotor Inertia:
- 14.48 kg.cm²
- Second Shaft:
- without second shaft end
- Number Of Motor Stacks:
- 2
- Feedback Type:
- single turn SinCos Hiperface
- Warranty:
- 18 months
- Product Compatibility:
- LXM05AD42M3X 200...240 V three phase || LXM05BD42M3X 200...240 V three phase || LXM05CD42M3X 200...240 V three phase
- Key Width:
- 40 mm
- Shaft Diameter:
- 24 mm
- Electrical Connection:
- straight connectors
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Continuous Stall Current:
- 22.5 A
- Mounting Holes Diameter:
- 11 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Nominal Torque:
- 12.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 12.3 N.m LXM32.D72N4 24 A, 480 V, three phase || 9.2 N.m LXM05AD42M3X, 200...240 V, three phase || 9.2 N.m LXM05BD42M3X, 200...240 V, three phase || 9.2 N.m LXM05CD42M3X, 200...240 V, three phase
- Torque Constant:
- 1.47 N.m/A 120 °C
- Back Emf Constant:
- 101 V/krpm 120 °C
- Number Of Motor Poles:
- 10
- Environmental Disclosure:
- ENVPEP111049EN
- Product Or Component Type:
- servo motor
- Range Compatibility:
- Lexium 05 || Lexium 32
- Maximum Current Irms:
- 72 A LXM32.D72N4 || 75.2 A LXM05AD42M3X || 75.2 A LXM05BD42M3X || 75.2 A LXM05CD42M3X
- Ip Degree Of Protection:
- IP65 standard || IP67 with IP67 kit
- Length:
- 310.5 mm
- Shaft End:
- keyed
- Sustainable Offer Status:
- Green Premium product
- Holding Torque:
- 23 N.m holding brake
- Continuous Stall Torque:
- 19.5 N.m LXM32.D72N4 24 A, 400 V, three phase || 19.5 N.m LXM32.D72N4 24 A, 480 V, three phase || 14.4 N.m LXM05AD42M3X, 200...240 V, three phase || 14.4 N.m LXM05BD42M3X, 200...240 V, three phase || 14.4 N.m LXM05CD42M3X, 200...240 V, three phase
- Shaft Length:
- 50 mm
- Type Of Cooling:
- natural convection
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Motor Flange Size:
- 140 mm
- Circularity Profile:
- N/A
- Net Weight:
- 17.7 kg
- Brake Pull-In Power:
- 24 W
- Peak Stall Torque:
- 59.3 N.m LXM32.D72N4 24 A, 400 V, three phase || 59.3 N.m LXM32.D72N4 24 A, 480 V, three phase || 24.56 N.m LXM05AD42M3X, 200...240 V, three phase || 24.56 N.m LXM05BD42M3X, 200...240 V, three phase
- Centring Collar Diameter:
- 130 mm
- Stator Electrical Time Constant:
- 12.1 ms 20 °C
- Speed Feedback Resolution:
- 131072 points/turn
- Maximum Permanent Current:
- 75.2 A