Schneider Electric HDA36100U31X Molded Case Circuit Breaker 600V 100A

(No reviews yet) Write a Review
SKU:
HDA36100U31X
UPC:
785901154426
Condition:
New
Phase Connection:
ABC
Protected Poles Description:
3t
Poles Description:
3P
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Product Certifications:
UL || CSA || NOM
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Range:
PowerPact
Eu Rohs Directive:
Compliant with Exemptions
Product Name:
PowerPact H
Pollution Degree:
3 IEC 60947-1
Breaking Capacity Code:
D
Warranty:
18 months
Mounting Height:
4.5 in
Ip Degree Of Protection:
front cover IP40 IEC 60529
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Product Or Component Type:
circuit breaker
Trip Unit Name:
MicroLogic 3.2
Circularity Profile:
ENVEOLI2206028EN
Utilisation Category:
category A
Mercury Free:
Yes
Circuit Breaker Application:
HACR rated
Mounting Mode:
I-Line bracket)
Width:
104 mm
Terminal Identifier:
AL150HD
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Quantity Per Set:
1
Communication Interface:
Modbus || Ethernet
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Environmental Disclosure:
ENVPEP2206028EN
Network Frequency:
50/60 Hz
Ambient Air Temperature For Operation:
-2-70 °C
Mounting Support:
bracket
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
Color:
Black
Suitability For Isolation:
yes IEC 60947-2
Quality Labels:
CE
Device Application:
distribution
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Ambient Air Temperature For Storage:
-50-85 °C
Electrical Connection:
I-Line connection, line || lugs, load
Depth:
86 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Rohs Exemption Information:
Yes
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Control Type:
toggle
Continuous Current Rating:
0.8
Wire Stripping Length:
16 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Line Rated Current:
100-100 A
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Height:
163 mm
Sustainable Offer Status:
Green Premium product
Net Weight:
2.2 kg
Pvc Free:
Yes
  • Schneider Electric HDA36100U31X Molded Case Circuit Breaker 600V 100A
  • Schneider Electric HDA36100U31X Molded Case Circuit Breaker 600V 100A
  • Schneider Electric HDA36100U31X Molded Case Circuit Breaker 600V 100A
$1,569.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 14kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 100A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose