Schneider Electric HGA36060U33X Molded Case Circuit Breaker 600V 60A

(No reviews yet) Write a Review
SKU:
HGA36060U33X
UPC:
3606486282458
Condition:
New
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Height:
163 mm
Utilisation Category:
category A
Width:
104 mm
Range:
PowerPact
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Suitability For Isolation:
yes IEC 60947-2
Sustainable Offer Status:
Green Premium product
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Mounting Mode:
I-Line bracket)
Ambient Air Temperature For Operation:
-2-70 °C
Warranty:
18 months
Pvc Free:
Yes
Product Name:
PowerPact H
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
Terminal Identifier:
AL150HD
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Circularity Profile:
ENVEOLI2206028EN
Mercury Free:
Yes
Product Or Component Type:
circuit breaker
Phase Connection:
ABC
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Mounting Height:
4.5 in
Pollution Degree:
3 IEC 60947-1
Device Application:
distribution
Ip Degree Of Protection:
front cover IP40 IEC 60529
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Environmental Disclosure:
ENVPEP2206028EN
Poles Description:
3P
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Circuit Breaker Application:
HACR rated
Mounting Support:
bracket
Trip Unit Name:
MicroLogic 3.2 S
Communication Interface:
Modbus || Ethernet
Wire Stripping Length:
16 mm
Breaking Capacity Code:
G
Control Type:
toggle
Eu Rohs Directive:
Compliant with Exemptions
Quantity Per Set:
1
Product Certifications:
UL || CSA || NOM
Quality Labels:
CE
Protected Poles Description:
3t
Line Rated Current:
60-60 A
Rohs Exemption Information:
Yes
Net Weight:
2.2 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Continuous Current Rating:
0.8
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Electrical Connection:
I-Line connection, line || lugs, load
Network Frequency:
50/60 Hz
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Depth:
86 mm
Color:
Black
Ambient Air Temperature For Storage:
-50-85 °C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
  • Schneider Electric HGA36060U33X Molded Case Circuit Breaker 600V 60A
  • Schneider Electric HGA36060U33X Molded Case Circuit Breaker 600V 60A
  • Schneider Electric HGA36060U33X Molded Case Circuit Breaker 600V 60A
$1,939.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 60A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose