Schneider Electric HGA36100SA Molded Case Circuit Breaker 600V 100A
Schneider Electric
$3,733.50
$1200 Minimum Order for Non-stock Items or $60 Addl Schneider Handling Fee Applies
PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 100A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed 120VAC shunt trip. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- Product Or Component Type:
- circuit breaker
- Eu Rohs Directive:
- Compliant
- Magnetic Tripping Current:
- 1700-1700 A
- Electrical Connection:
- I-Line connection, line || lugs, load
- Device Application:
- distribution
- Ambient Air Temperature For Operation:
- -2-70 °C
- Number Of Slots:
- 2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
- Pollution Degree:
- 3 IEC 60947-1
- Pvc Free:
- Yes
- Quantity Per Set:
- 1
- Operating Altitude:
- < 6561.68 ft (2000 m) without derating || 5000 m with derating
- Awg Gauge:
- AWG 14...AWG 3/0 aluminium/copper terminal
- Warranty:
- 18 months
- Network Frequency:
- 50/60 Hz
- Product Certifications:
- UL || CSA || NOM
- Range:
- PowerPact
- [Ui] Rated Insulation Voltage:
- 750 V IEC 60947-2
- Breaking Capacity Code:
- G
- Accessory / Separate Part Type:
- shunt trip 110...130 V AC compartment
- Environmental Disclosure:
- ENVPEP1311006EN
- Wire Stripping Length:
- 16 mm
- Suitability For Isolation:
- yes IEC 60947-2
- Breaking Capacity:
- 65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
- Control Type:
- toggle
- Utilisation Category:
- category A
- Ambient Air Temperature For Storage:
- -50-85 °C
- Mounting Height:
- 4.5 in
- Communication Interface:
- Modbus || Ethernet
- Height:
- 163 mm
- Depth:
- 86 mm
- Rohs Exemption Information:
- Yes
- Mercury Free:
- Yes
- Circuit Breaker Application:
- HACR rated
- Tightening Torque:
- 5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
- Trip Unit Technology:
- thermal-magnetic
- Width:
- 104 mm
- Ip Degree Of Protection:
- front cover IP40 IEC 60529
- Standards:
- UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
- [Ics] Rated Service Breaking Capacity:
- 65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
- Local Signalling:
- switched off (OFF) 1 trip indicator green)
- Continuous Current Rating:
- 0.8
- Phase Connection:
- ABC
- Circularity Profile:
- ENVEOLI1311006EN
- Protected Poles Description:
- 3t
- Poles Description:
- 3P
- Line Rated Current:
- 100-100 A
- Terminal Identifier:
- AL150HD
- [Ue] Rated Operational Voltage:
- 690 V AC 50/60 Hz IEC 60947-3
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947-2
- Magnetic Hold Current:
- 900 A
- Sustainable Offer Status:
- Green Premium product
- Mounting Support:
- bracket
- Quality Labels:
- CE
- Color:
- Black
- Mounting Mode:
- I-Line bracket)
- Net Weight:
- 2.2 kg
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- Product Name:
- PowerPact H
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
