Schneider Electric HGA36150U43X Molded Case Circuit Breaker 600V 150A

(No reviews yet) Write a Review
SKU:
HGA36150U43X
UPC:
3.60649E+12
Condition:
New
Continuous Current Rating:
0.8
Product Name:
PowerPact H
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Trip Unit Technology:
electronic, ammeter, MicroLogic 5.2 A, LSI
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
-2-70 °C
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Network Frequency:
50/60 Hz
Quality Labels:
CE
Depth:
86 mm
Protected Poles Description:
3t
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Wire Stripping Length:
16 mm
Product Or Component Type:
circuit breaker
Suitability For Isolation:
yes IEC 60947-2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ip Degree Of Protection:
front cover IP40 IEC 60529
Height:
163 mm
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Device Application:
distribution
Poles Description:
3P
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Width:
104 mm
Mercury Free:
Yes
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Color:
Black
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Mounting Mode:
I-Line bracket)
Phase Connection:
ABC
Terminal Identifier:
AL150HD
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Range:
PowerPact
Ambient Air Temperature For Storage:
-50-85 °C
Mounting Height:
4.5 in
Eu Rohs Directive:
Compliant with Exemptions
Pollution Degree:
3 IEC 60947-1
Quantity Per Set:
1
Communication Interface:
Modbus || Ethernet
Breaking Capacity Code:
G
Circularity Profile:
ENVEOLI2206028EN
Control Type:
toggle
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Electrical Connection:
I-Line connection, line || lugs, load
Circuit Breaker Application:
HACR rated
Sustainable Offer Status:
Green Premium product
Mounting Support:
bracket
Net Weight:
2.2 kg
Trip Unit Name:
MicroLogic 5.2 A
Warranty:
18 months
Line Rated Current:
150-150 A
Pvc Free:
Yes
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Environmental Disclosure:
ENVPEP2206028EN
Local Signalling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Product Certifications:
UL || CSA || NOM
Utilisation Category:
category A
  • Schneider Electric HGA36150U43X Molded Case Circuit Breaker 600V 150A
  • Schneider Electric HGA36150U43X Molded Case Circuit Breaker 600V 150A
$4,792.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Ammeter with a 5.2A trip unit and an LSI function with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 150A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose