Schneider Electric HJA36020YP Molded Case Circuit Breaker 600V 20A

(No reviews yet) Write a Review
SKU:
HJA36020YP
UPC:
785901950370
Condition:
New
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Ip Degree Of Protection:
front cover IP40 IEC 60529
Warranty:
18 months
Breaking Capacity Code:
J
Net Weight:
2.2 kg
Device Application:
distribution
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Quantity Per Set:
1
Ambient Air Temperature For Storage:
-50-85 °C
Color:
Black
Utilisation Category:
category A
Mounting Height:
4.5 in
Network Frequency:
50/60 Hz
Mercury Free:
Yes
Magnetic Tripping Current:
750-750 A
Magnetic Hold Current:
350 A
Line Rated Current:
20-20 A
Height:
163 mm
Pollution Degree:
3 IEC 60947-1
Circuit Breaker Application:
HACR rated
Quality Labels:
CE
Poles Description:
3P
Control Type:
toggle
Ambient Air Temperature For Operation:
-2-70 °C
Local Signalling:
switched off (OFF) 1 trip indicator green)
Suitability For Isolation:
yes IEC 60947-2
Communication Interface:
Modbus || Ethernet
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Product Name:
PowerPact H
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Phase Connection:
ABC
Product Certifications:
UL || CSA || NOM
Depth:
86 mm
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Protected Poles Description:
3t
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Wire Stripping Length:
16 mm
Range:
PowerPact
Electrical Connection:
I-Line connection, line || lugs, load
Eu Rohs Directive:
Compliant with Exemptions
Terminal Identifier:
AL150HD
Mounting Support:
bracket
Trip Unit Technology:
thermal-magnetic
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Mounting Mode:
I-Line bracket)
Width:
104 mm
Rohs Exemption Information:
Yes
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Environmental Disclosure:
ENVPEP2206027EN
Continuous Current Rating:
0.8
Pvc Free:
Yes
Circularity Profile:
ENVEOLI2206027EN
Accessory / Separate Part Type:
padlocking device
Product Or Component Type:
circuit breaker
$2,065.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 20A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed padlock handle. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose