Schneider Electric HJA36025 Molded Case Circuit Breaker 600V 25A

(No reviews yet) Write a Review
SKU:
HJA36025
UPC:
785901507291
Condition:
New
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Sustainable Offer Status:
Green Premium product
Range:
PowerPact
Network Frequency:
50/60 Hz
Protected Poles Description:
3t
Width:
104 mm
Mounting Support:
bracket
Quality Labels:
CE
Poles Description:
3P
Phase Connection:
ABC
Mercury Free:
Yes
Magnetic Hold Current:
350 A
Electrical Connection:
I-Line connection, line || lugs, load
Net Weight:
2.2 kg
Pollution Degree:
3 IEC 60947-1
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Ip Degree Of Protection:
front cover IP40 IEC 60529
Product Certifications:
UL || CSA || NOM
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Line Rated Current:
25-25 A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Mounting Mode:
I-Line bracket)
Local Signalling:
switched off (OFF) 1 trip indicator green)
Height:
163 mm
Device Application:
distribution
Pvc Free:
Yes
Mounting Height:
4.5 in
Quantity Per Set:
1
Breaking Capacity Code:
J
Ambient Air Temperature For Storage:
-50-85 °C
Magnetic Tripping Current:
750-750 A
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Color:
Black
Wire Stripping Length:
16 mm
Continuous Current Rating:
0.8
Rohs Exemption Information:
Yes
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Terminal Identifier:
AL150HD
Product Or Component Type:
circuit breaker
Utilisation Category:
category A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Trip Unit Technology:
thermal-magnetic
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
Communication Interface:
Modbus || Ethernet
Control Type:
toggle
Circularity Profile:
ENVEOLI2206027EN
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Environmental Disclosure:
ENVPEP2206027EN
Ambient Air Temperature For Operation:
-2-70 °C
Eu Rohs Directive:
Compliant with Exemptions
Warranty:
18 months
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Circuit Breaker Application:
HACR rated
Depth:
86 mm
Product Name:
PowerPact H
  • Schneider Electric HJA36025 Molded Case Circuit Breaker 600V 25A
  • Schneider Electric HJA36025 Molded Case Circuit Breaker 600V 25A
  • Schneider Electric HJA36025 Molded Case Circuit Breaker 600V 25A
$1,988.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 25A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose