Schneider Electric HJA36030YP Molded Case Circuit Breaker 600V 30A

(No reviews yet) Write a Review
SKU:
HJA36030YP
UPC:
7.85902E+11
Condition:
New
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Mounting Mode:
I-Line bracket)
Local Signalling:
switched off (OFF) 1 trip indicator green)
Height:
163 mm
Rohs Exemption Information:
Yes
Ip Degree Of Protection:
front cover IP40 IEC 60529
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Certifications:
UL || CSA || NOM
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Eu Rohs Directive:
Compliant with Exemptions
Control Type:
toggle
Protected Poles Description:
3t
Breaking Capacity Code:
J
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Mounting Height:
4.5 in
Mounting Support:
bracket
Product Name:
PowerPact H
Net Weight:
2.2 kg
Trip Unit Technology:
thermal-magnetic
Quality Labels:
CE
Magnetic Tripping Current:
750-750 A
Circuit Breaker Application:
HACR rated
Range:
PowerPact
Device Application:
distribution
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Color:
Black
Accessory / Separate Part Type:
padlocking device
Phase Connection:
ABC
Quantity Per Set:
1
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Ambient Air Temperature For Operation:
-2-70 °C
Network Frequency:
50/60 Hz
Pollution Degree:
3 IEC 60947-1
Environmental Disclosure:
ENVPEP2206027EN
Terminal Identifier:
AL150HD
Continuous Current Rating:
0.8
Wire Stripping Length:
16 mm
Electrical Connection:
I-Line connection, line || lugs, load
Product Or Component Type:
circuit breaker
Communication Interface:
Modbus || Ethernet
Utilisation Category:
category A
Suitability For Isolation:
yes IEC 60947-2
Circularity Profile:
ENVEOLI2206027EN
Ambient Air Temperature For Storage:
-50-85 °C
Sustainable Offer Status:
Green Premium product
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Line Rated Current:
30-30 A
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Poles Description:
3P
Warranty:
18 months
Pvc Free:
Yes
Mercury Free:
Yes
Magnetic Hold Current:
350 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Depth:
86 mm
Width:
104 mm
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
  • Schneider Electric HJA36030YP Molded Case Circuit Breaker 600V 30A
  • Schneider Electric HJA36030YP Molded Case Circuit Breaker 600V 30A
$2,065.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 30A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed padlock handle. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose