Schneider Electric HJL26020 Molded Case Circuit Breaker 600V 20A
Schneider Electric
$1,559.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric HJL26020 Molded Case Circuit Breaker 600V 20A
PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 20A, 2 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947-2
- Net Weight:
- 2.2 kg
- Operating Altitude:
- < 6561.68 ft (2000 m) without derating || 5000 m with derating
- Product Name:
- PowerPact H
- Mounting Support:
- lug
- Breaking Capacity Code:
- J
- Color:
- Black
- Wire Stripping Length:
- 16 mm
- Magnetic Tripping Current:
- 750-750 A
- Trip Unit Technology:
- thermal-magnetic
- Product Certifications:
- UL || CSA || NOM
- Mounting Mode:
- unit mount lug)
- Environmental Disclosure:
- ENVPEP2206027EN
- Quantity Per Set:
- 1
- Sustainable Offer Status:
- Green Premium product
- Rohs Exemption Information:
- Yes
- Local Signalling:
- switched off (OFF) 1 trip indicator green)
- [Ui] Rated Insulation Voltage:
- 750 V IEC 60947-2
- Suitability For Isolation:
- yes IEC 60947-2
- Range:
- PowerPact
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Electrical Connection:
- lugs, line || lugs, load
- Pollution Degree:
- 3 IEC 60947-1
- Standards:
- UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
- Device Application:
- distribution
- Communication Interface:
- Modbus || Ethernet
- [Ics] Rated Service Breaking Capacity:
- 100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
- Depth:
- 86 mm
- Magnetic Hold Current:
- 350 A
- Pvc Free:
- Yes
- Product Or Component Type:
- circuit breaker
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
- [Ue] Rated Operational Voltage:
- 690 V AC 50/60 Hz IEC 60947-3
- Ambient Air Temperature For Storage:
- -50-85 °C
- Circularity Profile:
- ENVEOLI2206027EN
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Ambient Air Temperature For Operation:
- -2-70 °C
- Continuous Current Rating:
- 0.8
- Line Rated Current:
- 20-20 A
- Height:
- 163 mm
- Ip Degree Of Protection:
- front cover IP40 IEC 60529
- Utilisation Category:
- category A
- Awg Gauge:
- AWG 14...AWG 3/0 aluminium/copper terminal
- Breaking Capacity:
- 100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
- Number Of Slots:
- 2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
- Mercury Free:
- Yes
- Control Type:
- toggle
- Warranty:
- 18 months
- Circuit Breaker Application:
- HACR rated
- Network Frequency:
- 50/60 Hz
- Quality Labels:
- CE
- Width:
- 104 mm
- Terminal Identifier:
- AL150HD
- Eu Rohs Directive:
- Compliant with Exemptions
- Tightening Torque:
- 5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
- Poles Description:
- 2P
- Protected Poles Description:
- 2t
- Brochure:
- View
- Catalog:
- View
- Datasheet:
- View
