Schneider Electric

Schneider Electric HR8IMA16C Surge protection device, Surgelogic, HR, 160kA, 600Y/347 VAC, 3 phase, 4 wire, SPD type 2

(No reviews yet) Write a Review
SKU:
HR8IMA16C
MPN:
HR8IMA16C
Condition:
New
Standards:
UL 1449:ed. 3 || UL 1283:ed. 5 || CSA C22.2 No 8:1986 || UL 96A:ed. 12 || UL 489:ed. 11 || CSA C22.2 No 5-09
Trip Unit Technology:
electronic
Breaking Capacity Code:
HR
Nema Degree Of Protection:
NEMA 2
Range Of Product:
Surgelogic
Country of Origin:
United States
Local Signaling:
status LED green per phase normal operation || status LED red per phase fault
Line Rated Current:
60 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Depth:
142.1 mm
[Uc] Maximum Continuous Operating Voltage:
420 V
Length:
483 mm
Connections - Terminals:
I-Line line || lugs ground AWG 6 copper 4 N.m || lugs neutral AWG 6 copper 4 N.m
Surge Current:
160 kA
Cable Length:
483 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Breaking Capacity:
100 kA
Eu Rohs Directive:
Compliant with Exemptions
Product Or Component Type:
surge protection device
Short-Circuit Protection:
200 kA
Mounting Support:
panel mounting
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Number Of Poles:
3
[Ue] Rated Operational Voltage:
600Y/347 V AC
Device Short Name:
IMA
Rohs Exemption Information:
Yes
Wiring Configuration:
4-wire
Phase:
3 phase
Provided Equipment:
alarm enable/disable switch || surge counter || circuit-breaker
$12,482.00

Description

Surgelogicâ„¢ Type IMA systems are internal surgical protection devices with a focus on service entrance and critical branch panel surge suppresion. With a surge current rating of 160,000 Amps and enhanced EMI/RFI filtering, this unit is retrofitted to be installed in a wide variety I-Line Branch units. Being modular in design, this unit is able to achieve superior surge suppression on the load side including at the branch panel. This unit uses the WYE system to allow two different voltages using three phase. This product is UL and CSA certified.
View AllClose

Related Products

Related Products