- Environmental Disclosure:
- ENVPEP2011004EN
- Mounting Support:
- flange
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating
- Voltage State 1 Guaranteed:
- 15...30 V
- Standards:
- EN 50347 || IEC 61800-3, Ed 2 || EN/IEC 61800-3 || EN 61800-3 : 2001-02 || IEC 60072-1 || EN 61800-3:2001, second environment || EN/IEC 50178
- Shaft Diameter:
- 9 mm
- Net Weight:
- 1.4 kg
- Warranty:
- 18 months
- Pvc Free:
- Yes
- Device Short Name:
- ILA
- Rotor Inertia:
- 0.17 kg.cm²
- Sustainable Offer Status:
- Green Premium product
- Supply Voltage Limits:
- 18-40 V
- Shaft Length:
- 20 mm
- Shaft End:
- untapped
- Range Of Product:
- Lexium integrated drive
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Holding Torque:
- 1.2 N.m holding brake
- Phase:
- single phase
- Discrete Output Voltage:
- 23...25 V
- Centring Collar Depth:
- 1.6 mm
- Second Shaft:
- without second shaft end
- Product Certifications:
- cUL || UL || TÃV
- Nominal Torque:
- 0.26 N.m
- Brake Application Time:
- 13 ms
- Centring Collar Diameter:
- 50 mm
- Service Life In Hours:
- 20000 h bearing
- Ambient Air Temperature For Operation:
- 50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
- Motor Type:
- AC Synchronous Servo Motor
- Vibration Resistance:
- 20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6
- Input/Output Type:
- 4 signals (each be used as input or output)
- Protection Type:
- overload of output voltage || safe torque off || short circuit of the output voltage
- Maximum Radial Force Fr:
- 89 N
- Ip Degree Of Protection:
- shaft bushing IP41 EN/IEC 60034-5 || total except shaft bushing IP54 EN/IEC 60034-5
- Maximum Switching Current:
- 100 mA per output || 200 mA total
- China Rohs Regulation:
- X
- Mounting Holes Diameter:
- 5.2 mm
- Discrete Input Current:
- 10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
- Rohs Exemption Information:
- Yes
- Circle Diameter Of The Mounting Holes:
- 66.6 mm
- Associated Fuse Rating:
- 0.416666666666667
- Length:
- 190.8 mm
- Feedback Type:
- single turn encoder
- Accuracy Error:
- +/- 0.05 °
- Current Consumption:
- 5000 mA maximum continuous || 7000 mA peak
- Ambient Air Temperature For Storage:
- -25-70 °C
- Nominal Speed:
- 3200 rpm 24 V || 5500 rpm 36 V
- Peak Stall Torque:
- 0.6 N.m
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Number Of Motor Stacks:
- 1
- Motor Flange Size:
- 57 mm
- Shock Resistance:
- 150 m/s² 1000 shocks EN/IEC 60068-2-29
- Number Of Mounting Holes:
- 4
- Number Of Motor Poles:
- 6
- Transmission Rate:
- 50, 100, 125, 250, 500, 800 and 1000 kbauds
- Circularity Profile:
- ENVEOLI2011004EN
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Marking:
- CE
- Product Or Component Type:
- motion integrated drive
- Gear Box Type:
- without
- Continuous Stall Torque:
- 0.26 N.m
- Type Of Cooling:
- natural convection
- Permissible Ambient Air Temperature Around The Device:
- 105 °C power amplifier || 110 °C motor
- Brake Pull-In Power:
- 10 W
- Holding Brake:
- with
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Communication Interface:
- CANopen DS301, Integrated
- Voltage State 0 Guaranteed:
- -3...4.5 V
- Electrical Connection:
- industrial connector
- Maximum Axial Force Fa:
- 104 N force pressure) || 104 N tensile force)
- Speed Feedback Resolution:
- 16384 points/turn x 4096 turns
- [Us] Rated Supply Voltage:
- 24 V || 36 V
- Relative Humidity:
- 15-85 % without condensation
- Brake Release Time:
- 14 ms
- Winding Type:
- medium speed of rotation and medium torque
- Network Type:
- DC
- Mercury Free:
- Yes