Schneider Electric ILA1F572PB1F0 Lexium Ila Servomot 24 36V Canop Brake

(No reviews yet) Write a Review
SKU:
ILA1F572PB1F0
UPC:
3389119225519
Condition:
New
Feedback Type:
single turn encoder
Speed Feedback Resolution:
16384 points/turn x 4096 turns
Number Of Mounting Holes:
4
Product Certifications:
UL || TÜV || cUL
Centring Collar Depth:
1.6 mm
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Winding Type:
medium speed of rotation and medium torque
Holding Brake:
with
Communication Interface:
CANopen DS301, Integrated
Warranty:
18 months
Voltage State 0 Guaranteed:
-3...4.5 V
Sustainable Offer Status:
Green Premium product
Net Weight:
1.7 kg
Service Life In Hours:
20000 h bearing
Holding Torque:
1.2 N.m holding brake
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Standards:
IEC 60072-1 || IEC 61800-3, Ed 2 || EN 61800-3:2001, second environment || IEC 61800-3 || EN 61800-3 : 2001-02 || IEC 50347 || IEC 50178
Shaft Length:
20 mm
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Maximum Axial Force Fa:
104 N force pressure) || 104 N tensile force)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Radial Force Fr:
107 N
Number Of Motor Poles:
6
Input/Output Type:
4 signals (each be used as input or output)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
ILA
Brake Pull-In Power:
10 W
Continuous Stall Torque:
0.45 N.m
Rotor Inertia:
0.25 kg.cm²
Environmental Disclosure:
ENVPEP2011004EN
Protection Type:
safe torque off || short circuit of the output voltage || overload of output voltage
Electrical Connection:
printed circuit board connector
Accuracy Error:
+/- 0.05 °
Number Of Motor Stacks:
2
Marking:
CE
Mounting Holes Diameter:
5.2 mm
Type Of Cooling:
natural convection
Associated Fuse Rating:
0.416666666666667
China Rohs Regulation:
X
Circularity Profile:
ENVEOLI2011004EN
Peak Stall Torque:
0.72 N.m
Range Of Product:
Lexium integrated drive
Voltage State 1 Guaranteed:
15...30 V
Network Type:
DC
Gear Box Type:
without
Ambient Air Temperature For Storage:
-25-70 °C
Shaft Diameter:
9 mm
Brake Application Time:
13 ms
Brake Release Time:
14 ms
Relative Humidity:
15-85 % without condensation
Shaft End:
untapped
Second Shaft:
without second shaft end
Mercury Free:
Yes
Circle Diameter Of The Mounting Holes:
66.6 mm
Length:
209.3 mm
Supply Voltage Limits:
18-40 V
Nominal Torque:
0.45 N.m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Output Voltage:
23...25 V
Motor Type:
AC Synchronous Servo Motor
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Nominal Speed:
2600 rpm 24 V || 4300 rpm 36 V
Centring Collar Diameter:
50 mm
Rohs Exemption Information:
Yes
Motor Flange Size:
57 mm
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Current Consumption:
7000 mA maximum continuous || 8500 mA peak
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Maximum Switching Current:
100 mA per output || 200 mA total
Phase:
single phase
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Support:
flange
Pvc Free:
Yes
[Us] Rated Supply Voltage:
24 V || 36 V
Product Or Component Type:
motion integrated drive
Catalog:
View
Datasheet:
View
$1,860.00

Description

This product is part of the Lexium ILA range, an offer of motion integrated drives for motion control. The motion integrated drive with a 6-pole AC synchronous servo motor features an integrated CANopen DS301 communication interface and untapped shaft with holding brake. It is an equipped with a single-turn encoder (16,384 points/turn x 4096 turns). The AC synchronous servo motor with a rated supply voltage of 24V, 36V DC, a peak current consumption of 8500mA and a nominal speed of 4300RPM at 36V. The shaft dimensions are 9mm (diameter) x 20mm (length). It is furnished with printed circuit board connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. Its dimensions are 209.3mm (length) x 57mm (width) and the centering collar dimensions are 1.6mm (depth) x 50mm (diameter) with 66.6mm mounting hole. It weighs 1.7kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CE, TUV, CUL and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, EN/IEC 50178, EN 61800-3 2001-02, IEC 61800-3, Ed 2 and EN 50347 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose