Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Sustainable Offer Status:
Green Premium product
Current Consumption:
7500 mA maximum continuous || 9000 mA peak
Number Of Motor Stacks:
2
Environmental Disclosure:
ENVPEP2011004EN
Type Of Cooling:
natural convection
Communication Interface:
Modbus TCP, Integrated
Speed Feedback Resolution:
16384 points/turn x 4096 turns
Mounting Holes Diameter:
5.2 mm
Centring Collar Depth:
1.6 mm
Maximum Radial Force Fr:
107 N
Electrical Connection:
printed circuit board connector
Second Shaft:
without second shaft end
Maximum Switching Current:
100 mA per output || 200 mA total
Input/Output Type:
4 signals (each be used as input or output)
Service Life In Hours:
20000 h bearing
Relative Humidity:
15-85 % without condensation
Voltage State 1 Guaranteed:
15...30 V
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Rotor Inertia:
0.173 kg.cm²
Pvc Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications:
cUL || TÃV || UL
Warranty:
18 months
Peak Stall Torque:
0.85 N.m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Speed:
3000 rpm 24 V || 5100 rpm 48 V
Product Or Component Type:
motion integrated drive
Circularity Profile:
ENVEOLI2011004EN
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Number Of Mounting Holes:
4
Network Type:
DC
Winding Type:
high speed of rotation and medium torque
[Us] Rated Supply Voltage:
24 V || 48 V
Net Weight:
1.7 kg
Holding Brake:
without
Nominal Torque:
0.57 N.m
Device Short Name:
ILA
Transmission Rate:
10, 100 Mbits
Rohs Exemption Information:
Yes
Mounting Support:
flange
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Standards:
EN 61800-3:2001, second environment || IEC 60072-1 || IEC 50178 || IEC 61800-3, Ed 2 || IEC 61800-3 || IEC 50347 || EN 61800-3 : 2001-02
Phase:
single phase
Discrete Input Current:
10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
Circle Diameter Of The Mounting Holes:
66.6 mm
Supply Voltage Limits:
18-55.2 V
Shaft Diameter:
9 mm
Number Of Motor Poles:
6
Protection Type:
safe torque off || short circuit of the output voltage || overload of output voltage