Schneider Electric ILE1F661PB1A5 Lexium Ile Bldc Mot 24 36V Canop Gear
SKU:
ILE1F661PB1A5
UPC:
3.38912E+12
MPN:
Condition:
New
Shock Resistance:
150 m/s² 1000 shocks EN/IEC 60068-2-29
Relative Humidity:
15-85 % without condensation
Speed Feedback Resolution:
12 points/turn motor || 1.26° gearbox output
Maximum Supply Current:
5.1 A 36 V || 0.1 A power stage disabled) || 6.8 A 24 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Output Voltage:
23...25 V
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Switching Current:
100 mA per output || 200 mA total
Length:
229 mm
Circularity Profile:
ENVEOLI1411012EN
Net Weight:
2.3 kg
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Product Or Component Type:
motion integrated drive
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Shaft End:
hole
Holding Brake:
without
Device Short Name:
ILE
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Supply Voltage Limits:
18-40 V
Maximum Mechanical Speed:
186 rpm
Nominal Speed:
168 rpm 24 V || 168 rpm 36 V
Range Of Product:
Lexium integrated drive
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Marking:
CE
Associated Fuse Rating:
0.416666666666667
Accuracy Error:
+/- 1 point
Continuous Stall Torque:
4.2 N.m
Mercury Free:
Yes
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
China Rohs Regulation:
X
Detent Torque:
2.9 N.m
Current Consumption:
7000 mA peak || 5500 mA maximum continuous
Maximum Radial Force Fr:
200 N
Voltage State 1 Guaranteed:
15...30 V
Warranty:
18 months
Environmental Disclosure:
ENVPEP1411012EN
Communication Interface:
CANopen DS301, Integrated
Type Of Cooling:
natural convection
Number Of Mounting Holes:
2
Phase:
single phase
Standards:
EN 50347 || IEC 60072-1 || IEC 61800-3, Ed 2 || EN/IEC 61800-3 || EN 61800-3:2001, second environment || EN 61800-3 : 2001-02 || EN/IEC 50178
Sustainable Offer Status:
Green Premium product
Motor Type:
brushless DC motor
Motor Flange Size:
66 mm
[Us] Rated Supply Voltage:
36 V || 24 V
Second Shaft:
without second shaft end
Mounting Support:
flange
Mounting Holes Diameter:
4.4 mm
Service Life In Hours:
3000 h bearing
Maximum Torsional Backlash:
1.5 °
Input/Output Type:
4 signals (each be used as input or output)
Peak Stall Torque:
3.74 N.m 24 V || 5.18 N.m 36 V
Nominal Output Power:
45 W 24 V || 61 W 36 V
Rotor Inertia:
90 kg.cm²
Ambient Air Temperature For Storage:
-25-70 °C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Number Of Motor Poles:
6
Number Of Motor Stacks:
1
Protection Type:
safe torque off || short circuit of the output voltage || overload of output voltage
Voltage State 0 Guaranteed:
-3...4.5 V
Maximum Axial Force Fa:
80 N
Pvc Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated CANopen...
