Schneider Electric ILE1F661PC1A1 Lexium Ile Bldc Mot 24 36V Canop Gear
SKU:
ILE1F661PC1A1
UPC:
3.38912E+12
MPN:
Condition:
New
Detent Torque:
1.1 N.m
Ambient Air Temperature For Storage:
-25-70 °C
Reduction Ratio:
18:1 (160:9)
Nominal Speed:
225 rpm 24 V || 270 rpm 36 V
Range Of Product:
Lexium integrated drive
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Relative Humidity:
15-85 % without condensation
Communication Interface:
CANopen DS301, Integrated
Shaft End:
keyed
Circularity Profile:
ENVEOLI1411012EN
Nominal Output Power:
74 W 24 V || 98 W 36 V
Type Of Cooling:
natural convection
Shaft Diameter:
10 mm
[Us] Rated Supply Voltage:
36 V || 24 V
Number Of Mounting Holes:
4
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Supply Voltage Limits:
18-40 V
Voltage State 1 Guaranteed:
15...30 V
Warranty:
18 months
Nominal Torque:
3.1 N.m 24 V || 3.5 N.m 36 V
Voltage State 0 Guaranteed:
-3...4.5 V
Phase:
single phase
Service Life In Hours:
2500 h bearing short-term operation || 15000 h bearing long-term operation
Gear Box Type:
straight teeth gear, 3 stages
Maximum Switching Current:
100 mA per output || 200 mA total
Pvc Free:
Yes
Peak Stall Torque:
3.74 N.m 24 V || 5.18 N.m 36 V
Mercury Free:
Yes
Circle Diameter Of The Mounting Holes:
73.54 mm
Device Short Name:
ILE
Sustainable Offer Status:
Green Premium product
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Protection Type:
short circuit of the output voltage || safe torque off || overload of output voltage
Mounting Holes Diameter:
4.4 mm
Mounting Support:
flange
Current Consumption:
7000 mA peak || 5500 mA maximum continuous
Input/Output Type:
4 signals (each be used as input or output)
Product Or Component Type:
motion integrated drive
Winding Type:
medium speed of rotation and medium torque
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Network Type:
DC
Motor Flange Size:
66 mm
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Net Weight:
1.85 kg
Centring Collar Diameter:
16 mm
Standards:
IEC 61800-3, Ed 2 || IEC 60072-1 || IEC 61800-3 || EN 61800-3:2001, second environment || IEC 50178 || EN 61800-3 : 2001-02 || IEC 50347
Maximum Supply Current:
0.06 A 36 V power stage disabled) || 0.1 A 24 V power stage disabled) || 4 A 36 V || 4.5 A 24 V
Rotor Inertia:
48 kg.cm²
Associated Fuse Rating:
0.416666666666667
Maximum Axial Force Fa:
10 N long-term operation) || 80 N short-term operation)
Maximum Mechanical Speed:
281 rpm
Holding Brake:
without
Key Width:
16 mm
Number Of Motor Stacks:
1
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Radial Force Fr:
200 N long-term operation) || 200 N short-term operation)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated CANopen...