Reference contains Substances of Very High Concern above the threshold
Second Shaft:
without second shaft end
Nominal Torque:
9 N.m 24 V || 9.2 N.m 36 V
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Input/Output Type:
4 signals (each be used as input or output)
Shaft End:
hole
Device Short Name:
ILE
[Us] Rated Supply Voltage:
36 V || 24 V
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Accuracy Error:
+/- 1 point
Product Certifications:
UL || TÃV || cUL
Maximum Supply Current:
0.1 A power stage disabled) || 6.8 A 24 V || 3.8 A 36 V
Warranty:
18 months
Mounting Support:
flange
Protection Type:
short circuit of the output voltage || safe torque off || overload of output voltage
Number Of Motor Stacks:
1
Detent Torque:
12.3 N.m
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Nominal Speed:
44 rpm 24 V || 44 rpm 36 V
Number Of Mounting Holes:
2
Communication Interface:
CANopen DS301, Integrated
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Maximum Torsional Backlash:
1 °
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Mounting Holes Diameter:
4.4 mm
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Ambient Air Temperature For Storage:
-25-70 °C
Feedback Type:
BLDC encoder
Reduction Ratio:
92:1 (735:5)
Environmental Disclosure:
ENVPEP1411012EN
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Network Type:
DC
Service Life In Hours:
9000 h bearing
Voltage State 0 Guaranteed:
-3...4.5 V
Continuous Stall Torque:
11.7 N.m
Voltage State 1 Guaranteed:
15...30 V
Rohs Exemption Information:
Yes
Maximum Switching Current:
100 mA per output || 200 mA total
Mercury Free:
Yes
Relative Humidity:
15-85 % without condensation
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
X
Centring Collar Diameter:
36 mm
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Net Weight:
2.3 kg
Speed Feedback Resolution:
12 points/turn motor || 0.33° gearbox output
Type Of Cooling:
natural convection
Range Of Product:
Lexium integrated drive
Sustainable Offer Status:
Green Premium product
Gear Box Type:
worm gear, 3 stages
Phase:
single phase
Number Of Motor Poles:
6
Pvc Free:
Yes
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated CANopen...
This Lexium ILE integrated servo drive works at a rated supply voltage of 24V or 36V dc. This integrated drive range offers the motor technologie to meet the requirements for dynamic performance,...
