Schneider Electric ILE2K661PC1A6 Lexium Ile Bldc Mot 24 48V Eth Ip Gear
SKU:
ILE2K661PC1A6
UPC:
3606485204826
MPN:
Condition:
New
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Voltage State 0 Guaranteed:
-3...4.5 V
Peak Stall Torque:
13.93 N.m 24 V || 13.93 N.m 48 V
Speed Feedback Resolution:
12 points/turn motor || 0.56° gearbox output
Rotor Inertia:
430 kg.cm²
Circularity Profile:
ENVEOLI1411012EN
Maximum Mechanical Speed:
93 rpm
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Axial Force Fa:
80 N
Communication Interface:
Ethernet/IP, Integrated
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Centring Collar Diameter:
36 mm
Transmission Rate:
125, 250, 500 kbauds
Product Certifications:
UL || cUL || TÃV
Voltage State 1 Guaranteed:
15...30 V
Length:
229 mm
Mounting Holes Diameter:
4.4 mm
Maximum Supply Current:
0.1 A power stage disabled) || 6.8 A 24 V || 2.7 A 48 V
Maximum Switching Current:
100 mA per output || 200 mA total
Marking:
CE
Ambient Air Temperature For Operation:
40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
Winding Type:
medium speed of rotation and medium torque
Range Of Product:
Lexium integrated drive
Motor Type:
brushless DC motor
Shaft End:
hole
[Us] Rated Supply Voltage:
24 V || 48 V
Protection Type:
overload of output voltage || safe torque off || short circuit of the output voltage
Electrical Connection:
industrial connector
Nominal Torque:
6 N.m 24 V || 6 N.m 48 V
Nominal Speed:
75 rpm 24 V || 75 rpm 48 V
Feedback Type:
BLDC encoder
Gear Box Type:
worm gear, 3 stages
Service Life In Hours:
6000 h bearing
Pvc Free:
Yes
Phase:
single phase
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Accuracy Error:
+/- 1 point
Network Type:
DC
Holding Brake:
without
Product Or Component Type:
motion integrated drive
Relative Humidity:
15-85 % without condensation
Number Of Mounting Holes:
2
Sustainable Offer Status:
Green Premium product
Reduction Ratio:
54:1 (1715:32)
Mounting Support:
flange
Environmental Disclosure:
ENVPEP1411012EN
Number Of Motor Stacks:
1
Commissioning Interface:
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
Associated Fuse Rating:
16 A
Supply Voltage Limits:
18-55.2 V
Device Short Name:
ILE
Current Consumption:
7000 mA peak || 5500 mA maximum continuous
Standards:
EN 61800-3:2001, second environment || EN 61800-3 : 2001-02 || IEC 60072-1 || IEC 61800-3, Ed 2 || IEC 61800-3 || IEC 50178 || IEC 50347
Motor Flange Size:
66 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
China Rohs Regulation:
X
Second Shaft:
without second shaft end
Detent Torque:
6.5 N.m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Mercury Free:
Yes
Continuous Stall Torque:
8 N.m
Ambient Air Temperature For Storage:
-25-70 °C
Maximum Radial Force Fr:
200 N
Net Weight:
2.3 kg
Type Of Cooling:
natural convection
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated EtherNet/IP...
This product is part of the Lexium ILE range, an offer of integrated motion drives for motion control. The motion integrated drive with a 6-pole brushless DC motor features an integrated EtherNet/IP...
