Schneider Electric ILS1F572PB1A0 Lexium Ils Stepper Mot 24 36V Canop

(No reviews yet) Write a Review
SKU:
ILS1F572PB1A0
UPC:
3389119227063
Condition:
New
Maximum Switching Current:
100 mA per output || 200 mA total
Voltage State 1 Guaranteed:
15...30 V
Communication Interface:
CANopen DS301, Integrated
Product Or Component Type:
motion integrated drive
Marking:
CE
Centring Collar Diameter:
38.1 mm
Standards:
IEC 61800-3 || EN 61800-3:2001, second environment || IEC 50347 || EN 61800-3 : 2001-02 || IEC 61800-3, Ed 2 || IEC 60072-1 || IEC 50178
Motor Type:
3-phase stepper motor
Feedback Type:
index pulse
Number Of Mounting Holes:
4
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
ILS
Holding Torque:
1.02 N.m
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Winding Type:
medium speed of rotation and medium torque
Shaft Length:
21 mm
Number Of Motor Poles:
6
Environmental Disclosure:
ENVPEP1411002EN
Shaft Diameter:
6.35 mm
Type Of Cooling:
natural convection
Phase:
single phase
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Product Certifications:
cUL || UL || TÜV
Motor Flange Size:
57 mm
Speed Feedback Resolution:
20000 points/turn
Relative Humidity:
15-85 % without condensation
[Us] Rated Supply Voltage:
24 V || 36 V
Number Of Motor Stacks:
2
Maximum Radial Force Fr:
24 N
China Rohs Regulation:
X
Service Life In Hours:
20000 h bearing
Ambient Air Temperature For Storage:
-25-70 °C
Circle Diameter Of The Mounting Holes:
66.6 mm
Network Type:
DC
Maximum Axial Force Fa:
100 N tensile force) || 8.4 N force pressure)
Discrete Output Voltage:
23...25 V
Electrical Connection:
printed circuit board connector
Associated Fuse Rating:
0.416666666666667
Shaft End:
untapped
Mounting Support:
flange
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Centring Collar Depth:
1.6 mm
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Input/Output Type:
4 signals (each be used as input or output)
Holding Brake:
without
Rotor Inertia:
0.22 kg.cm²
Circularity Profile:
ENVEOLI1411002EN
Gear Box Type:
without
Second Shaft:
without second shaft end
Length:
115.9 mm
Rohs Exemption Information:
Yes
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Supply Voltage Limits:
18-40 V
Pvc Free:
Yes
Warranty:
18 months
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Range Of Product:
Lexium integrated drive
Current Consumption:
3500 mA maximum
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Protection Type:
safe torque off || overload of output voltage || short circuit of the output voltage
Voltage State 0 Guaranteed:
-3...4.5 V
Accuracy Error:
+/- 6 arc min
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Peak Stall Torque:
0.9 N.m
Net Weight:
1.6 kg
Mounting Holes Diameter:
5.2 mm
Maximum Mechanical Speed:
3000 rpm
Nominal Torque:
0.9 N.m
Nominal Speed:
300 rpm 24 V || 600 rpm 36 V
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Continuous Stall Torque:
0.9 N.m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
$920.00

Description

This product is part of the Lexium ILS range, an offer of integrated motion drives for motion control. The integrated motion drive with a 6-pole stepper motor features an integrated CANopen DS301 communication interface. The 3-phase stepper motor with a rated supply voltage of 24V, 36V DC, a maximum current consumption of 3500mA and a nominal speed of 600RPM at 36V and 300RPM at 24V. It offers medium speed of rotation and medium torque with untapped shaft end. It is furnished with printed circuit board connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. The length of this product is 115.9mm and the centering collar dimensions are 1.6mm (depth) x 38.1mm (diameter). It weighs 1.6kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CUL, TUV and UL. It meets EN/IEC 61800-3, EN 61800-3 2001, IEC 61800-3, Ed 2, IEC 60072-1 and EN/IEC 50178 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose