Schneider Electric ILS1F572PC1A0 Lexium Ils Stepper Mot 24 36V Canop

(No reviews yet) Write a Review
SKU:
ILS1F572PC1A0
UPC:
3.38912E+12
Condition:
New
Continuous Stall Torque:
0.9 N.m
Voltage State 1 Guaranteed:
15...30 V
Warranty:
18 months
Electrical Connection:
industrial connector
Speed Feedback Resolution:
20000 points/turn
Number Of Motor Poles:
6
Motor Type:
3-phase stepper motor
Marking:
CE
Associated Fuse Rating:
0.416666666666667
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Storage:
-25-70 °C
China Rohs Regulation:
X
Maximum Mechanical Speed:
3000 rpm
Ambient Air Temperature For Operation:
50-65 °C with power derating of 2 % per °C) || 0-50 °C without derating)
Shock Resistance:
150 m/s² 1000 shocks IEC 60068-2-29
Operating Altitude:
<= 3280.84 ft (1000 m) without derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Shaft Diameter:
6.35 mm
Phase:
single phase
Product Certifications:
TÜV || cUL || UL
Permissible Ambient Air Temperature Around The Device:
105 °C power amplifier || 110 °C motor
Current Consumption:
3500 mA maximum
Mercury Free:
Yes
Maximum Radial Force Fr:
24 N
Environmental Disclosure:
ENVPEP1411002EN
Standards:
IEC 61800-3 || IEC 50178 || EN 61800-3 : 2001-02 || IEC 50347 || EN 61800-3:2001, second environment || IEC 61800-3, Ed 2 || IEC 60072-1
Mounting Holes Diameter:
5.2 mm
Centring Collar Diameter:
38.1 mm
Feedback Type:
index pulse
Service Life In Hours:
20000 h bearing
Product Or Component Type:
motion integrated drive
Holding Brake:
without
Maximum Axial Force Fa:
100 N tensile force) || 8.4 N force pressure)
Mounting Support:
flange
Maximum Switching Current:
100 mA per output || 200 mA total
Discrete Output Voltage:
23...25 V
Rotor Inertia:
0.22 kg.cm²
Accuracy Error:
+/- 6 arc min
Nominal Speed:
300 rpm 24 V || 600 rpm 36 V
Range Of Product:
Lexium integrated drive
Network Type:
DC
Peak Stall Torque:
0.9 N.m
Centring Collar Depth:
1.6 mm
Second Shaft:
without second shaft end
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Circle Diameter Of The Mounting Holes:
66.6 mm
Shaft End:
untapped
Transmission Rate:
50, 100, 125, 250, 500, 800 and 1000 kbauds
Rohs Exemption Information:
Yes
Vibration Resistance:
20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Nominal Torque:
0.9 N.m
Communication Interface:
CANopen DS301, Integrated
Sustainable Offer Status:
Green Premium product
Net Weight:
1.6 kg
Voltage State 0 Guaranteed:
-3...4.5 V
Protection Type:
overload of output voltage || short circuit of the output voltage || safe torque off
Relative Humidity:
15-85 % without condensation
Motor Flange Size:
57 mm
Circularity Profile:
ENVEOLI1411002EN
Discrete Input Current:
10-10 mA at 24 V on/STO_A safety input || 3-3 mA at 24 V on/STO_B safety input || 2-2 mA at 24 V 24 V signal interface
Pvc Free:
Yes
Number Of Mounting Holes:
4
Type Of Cooling:
natural convection
Number Of Motor Stacks:
2
Gear Box Type:
without
Shaft Length:
21 mm
Holding Torque:
1.02 N.m
Supply Voltage Limits:
18-40 V
Ip Degree Of Protection:
shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
Winding Type:
medium speed of rotation and medium torque
Input/Output Type:
4 signals (each be used as input or output)
Length:
115.9 mm
[Us] Rated Supply Voltage:
36 V || 24 V
Device Short Name:
ILS
  • Schneider Electric ILS1F572PC1A0 Lexium Ils Stepper Mot 24 36V Canop
  • Schneider Electric ILS1F572PC1A0 Lexium Ils Stepper Mot 24 36V Canop
$1,120.00

Description

This product is part of the Lexium ILS range, an offer of integrated motion drives for motion control. The integrated motion drive with a 6-pole stepper motor features an integrated CANopen DS301 communication interface. The 3-phase stepper motor with a rated supply voltage of 24V, 36V DC, a maximum current consumption of 3500mA and a nominal speed of 600RPM at 36V and 300RPM at 24V. It offers medium speed of rotation and medium torque with untapped shaft end. It is furnished with industrial connector for electrical connection. It is an IP41 (shaft bushing) and IP54 (total except shaft bushing) rated product. The length of this product is 115.9mm and the centering collar dimensions are 1.6mm (depth) x 38.1mm (diameter). It weighs 1.6kg. It is suitable for printing, paper, packaging, handling, labelling, textile industry, electronics manufacture and medical technology applications. This product is certified by CUL, TUV and UL. It meets EN/IEC 61800-3, EN/IEC 50178, EN 61800-3 2001-02, EN 50347, EN 61800-3 2001 and IEC 60072-1 standards. It supports 57mm flange mount with a natural convection cooling system. Lexium integrated drives integrate motor, positioning controller, power electronics, Fieldbus and safety function in a single device. Integrated drives for motion control with stepper, servo or brushless DC motor.
View AllClose