- Number Of Motor Poles:
- 6
- Gear Box Type:
- without
- Standards:
- IEC 50347 || EN 61800-3:2001, second environment || EN 61800-3 : 2001-02 || IEC 61800-3 || IEC 61800-3, Ed 2 || IEC 50178 || IEC 60072-1
- Communication Interface:
- Ethernet/IP, Integrated
- [Us] Rated Supply Voltage:
- 48 V || 24 V
- Vibration Resistance:
- 20 m/s² 10-500 Hz) 10 cycles IEC 60068-2-6
- Supply Voltage Limits:
- 18-55 V
- Discrete Input Current:
- 10-10 mA at 24 V safety input || 2-2 mA at 24 V 24 V signal interface
- Shaft Diameter:
- 12 mm
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Nominal Torque:
- 4 N.m
- Peak Stall Torque:
- 4 N.m
- Shock Resistance:
- 150 m/s² 1000 shocks IEC 60068-2-29
- Motor Type:
- 3-phase stepper motor
- Maximum Switching Current:
- 100 mA per output || 200 mA total
- Nominal Speed:
- 180 rpm 24 V || 360 rpm 48 V
- Number Of Motor Stacks:
- 2
- Warranty:
- 18 months
- Maximum Axial Force Fa:
- 170 N tensile force) || 30 N force pressure)
- Brake Application Time:
- 20 ms
- Brake Release Time:
- 40 ms
- Network Type:
- DC
- Associated Fuse Rating:
- 16 A
- Device Short Name:
- ILS
- Voltage State 1 Guaranteed:
- 15...30 V
- Commissioning Interface:
- RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds)
- Ambient Air Temperature For Storage:
- -25-70 °C
- Relative Humidity:
- 15-85 % without condensation
- Permissible Ambient Air Temperature Around The Device:
- 105 °C power amplifier || 110 °C motor
- Marking:
- CE
- Range Of Product:
- Lexium integrated drive
- Voltage State 0 Guaranteed:
- -3...4.5 V
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Electrical Connection:
- industrial connector
- Holding Torque:
- 6 N.m holding brake || 4 N.m
- Maximum Mechanical Speed:
- 3000 rpm
- Product Certifications:
- cUL || TÃV || UL
- Mounting Holes Diameter:
- 6.5 mm
- Brake Pull-In Power:
- 22 W
- Type Of Cooling:
- natural convection
- Net Weight:
- 5.4 kg
- Accuracy Error:
- +/- 6 arc min
- Rotor Inertia:
- 2.4 kg.cm²
- Number Of Mounting Holes:
- 4
- Operating Altitude:
- <= 3280.84 ft (1000 m) without derating
- Holding Brake:
- with
- Feedback Type:
- index pulse
- Shaft Length:
- 30 mm
- Mounting Support:
- flange
- Circularity Profile:
- ENVEOLI1411002EN
- Winding Type:
- medium speed of rotation and medium torque
- Current Consumption:
- 5000 mA maximum continuous
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Ambient Air Temperature For Operation:
- 40-55 °C with power derating of 2 % per °C) || 0-40 °C without derating)
- Sustainable Offer Status:
- Green Premium product
- Rohs Exemption Information:
- Yes
- Centring Collar Diameter:
- 60 mm
- Input/Output Type:
- 4 signals (each be used as input or output)
- Product Or Component Type:
- motion integrated drive
- Ip Degree Of Protection:
- shaft bushing IP41 IEC 60034-5 || total except shaft bushing IP54 IEC 60034-5
- Discrete Output Voltage:
- 23...25 V
- Transmission Rate:
- 125, 250, 500 kbauds
- Phase:
- single phase
- Shaft End:
- untapped
- Speed Feedback Resolution:
- 20000 points/turn
- Second Shaft:
- without second shaft end
- Length:
- 217.3 mm
- Motor Flange Size:
- 85 mm
- Centring Collar Depth:
- 2 mm
- China Rohs Regulation:
- X
- Environmental Disclosure:
- ENVPEP1411002EN
- Mercury Free:
- Yes
- Service Life In Hours:
- 20000 h bearing
- Continuous Stall Torque:
- 4 N.m
- Circle Diameter Of The Mounting Holes:
- 99 mm
- Maximum Radial Force Fr:
- 100 N
- Protection Type:
- short circuit of the output voltage || safe torque off || overload of output voltage